PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13135PC24
13135PC24 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include color: BLACK, material: RUBBER SYNTHETIC, hole_diameter: 0.171 INCHES NOMINAL IN, overall_height: 1.000 INCHES NOMINAL IN, style_designator: FLAT TOP COUNTERBORED, material_hardness_rating: 70.0 DUROMETER NOMINAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-209-9343, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13135PC24
NSN: 5340-00-209-9343
FSC: 5340
CAGE: 06650 — BELL AND HOWELL PHILLIPSBURG CO CORPORATE OFFICES (USA)
SPECIFICATIONS
colorBLACK
materialRUBBER SYNTHETIC
hole_diameter0.171 INCHES NOMINAL IN
overall_height1.000 INCHES NOMINAL IN
style_designatorFLAT TOP COUNTERBORED
material_hardness_rating70.0 DUROMETER NOMINAL
outside/top_flange_diameter1.000 INCHES NOMINAL IN
NSN5340-00-209-9343
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13135PC24 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT TOP COUNTERBORED
•
OUTSIDE/TOP FLANGE DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
HOLE DIAMETER: 0.171 INCHES NOMINAL IN
•
COLOR: BLACK
•
MATERIAL HARDNESS RATING: 70.0 DUROMETER NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORFLAT TOP COUNTERBORED
OUTSIDE/TOP FLANGE DIAMETER1.000 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
HOLE DIAMETER0.171 INCHES NOMINAL IN
OVERALL HEIGHT1.000 INCHES NOMINAL IN
COLORBLACK
MATERIAL HARDNESS RATING70.0 DUROMETER NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
12924Interchangeable
interchangeable cross-reference
interchangeable
0-12924Interchangeable
interchangeable cross-reference
interchangeable
JHWS-115PInterchangeable
interchangeable cross-reference
interchangeable
10424470Interchangeable
interchangeable cross-reference
interchangeable
J5463Interchangeable
interchangeable cross-reference
interchangeable
85-584Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13135PC24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13135PC24?
13135PC24 is a BUMPER.
What parts can replace 13135PC24?
There are 10 known substitutes for 13135PC24: 12924, 0-12924, JHWS-115P and 7 more. Substitute compatibility should be verified for your specific system.
Is 13135PC24 still available?
13135PC24 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13135PC24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026