PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13133PC38
13133PC38 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN, overall_height: 0.188 INCHES NOMINAL IN, outside_diameter: 0.723 INCHES MINIMUM AND 0.733 INCHES MAXIMUM IN, style_designator: SPRING TENSION, material_thickness: 0.006 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-322-4529, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13133PC38
NSN: 5310-00-322-4529
FSC: 5310
CAGE: 06650 — BELL AND HOWELL PHILLIPSBURG CO CORPORATE OFFICES (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
overall_height0.188 INCHES NOMINAL IN
outside_diameter0.723 INCHES MINIMUM AND 0.733 INCHES MAXIMUM IN
style_designatorSPRING TENSION
material_thickness0.006 INCHES NOMINAL IN
NSN5310-00-322-4529
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 13133PC38 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: SPRING TENSION
•
OUTSIDE DIAMETER: 0.723 INCHES MINIMUM AND 0.733 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.006 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORSPRING TENSION
OUTSIDE DIAMETER0.723 INCHES MINIMUM AND 0.733 INCHES MAXIMUM IN
OVERALL HEIGHT0.188 INCHES NOMINAL IN
MATERIAL THICKNESS0.006 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
611415Interchangeable
interchangeable cross-reference
interchangeable
150 25Interchangeable
interchangeable cross-reference
interchangeable
1340Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751 TYCInterchangeable
interchangeable cross-reference
interchangeable
1507Interchangeable
interchangeable cross-reference
interchangeable
43-158Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13133PC38?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13133PC38?
13133PC38 is a WASHER,SPRING TENSION.
What parts can replace 13133PC38?
There are 18 known substitutes for 13133PC38: 611415, 150 25, 1340 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13133PC38?
13133PC38 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-322-4529. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13133PC38

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026