PartsTable
Technical Data Sheet
PartsTable / MRO / 1312-4
1312-4 ✓ Verified by PartsTable
SES Creative · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RETAINER,ELECTRICAL FILTER is a SES Creative industrial component. Key specifications include material: PLASTIC POLYVINYL CHLORIDE (PVC) AND STEEL COMP 304, body_type: SOLID, body_style: PRESS FIT, bore_style: W/COUNTERBORE FIRST END, tooth_form: STANDARD, inside_length: 4.000 INCHES MINIMUM AND 4.000 INCHES MINIMUM AND 4.200 INCHES MAXIMUM4.200 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-545-4249, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1312-4
NSN: 5310-00-545-4249
FSC: 5310
CAGE: 1ML14 — BRINKLEY TECHNOLOGY GROUP LLC DBA HERCULES MANUFACTURING (USA)
SPECIFICATIONS
materialPLASTIC POLYVINYL CHLORIDE (PVC) AND STEEL COMP 304
body_typeSOLID
body_stylePRESS FIT
bore_styleW/COUNTERBORE FIRST END
tooth_formSTANDARD
inside_length4.000 INCHES MINIMUM AND 4.000 INCHES MINIMUM AND 4.200 INCHES MAXIMUM4.200 INCHES MAXIMUM IN
overall_width4.100 INCHES MINIMUM4.100 INCHES MINIMUM IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
terminal_typeTAB, SOLDER LUG
coil_form_typeSOLID SINGLE COMPONENT
inclosure_typeFULLY INCLOSED
overall_height1.420 INCHES MINIMUM AND 1.420 INCHES MINIMUM AND 1.450 INCHES MAXIMUM1.450 INCHES MAXIMUM IN
NSN5310-00-545-4249
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1312-4 · SES Creative ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
135233-1Interchangeable
interchangeable cross-reference
interchangeable
AF40C25Interchangeable
interchangeable cross-reference
interchangeable
1312-4Interchangeable
interchangeable cross-reference
interchangeable
2088300-55Interchangeable
interchangeable cross-reference
interchangeable
46A13124Interchangeable
interchangeable cross-reference
interchangeable
9A845451Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1312-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1312-4?
1312-4 is a RETAINER,ELECTRICAL FILTER manufactured by SES Creative. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1312-4?
There are 12 known substitutes for 1312-4: 135233-1, AF40C25, 1312-4 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1312-4?
1312-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-545-4249. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1312-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026