PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 131182
131182 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The TAPE,SOUND RECORDING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include color: BLACK, material: RUBBER SILICONE CLASS Q OVERALL, overall_width: 0.430 INCHES NOMINAL IN, overall_length: 1.430 INCHES NOMINAL IN, special_features: ONE OUTSIDE CORNER CUT 0.240 IN. WIDE; 0.500 IN.

LONG IN, fabrication_method: CELLULAR, UNEXPLODED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-013-1182, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
131182
NSN: 5310-00-013-1182
FSC: 5310
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
colorBLACK
materialRUBBER SILICONE CLASS Q OVERALL
overall_width0.430 INCHES NOMINAL IN
overall_length1.430 INCHES NOMINAL IN
special_featuresONE OUTSIDE CORNER CUT 0.240 IN. WIDE; 0.500 IN. LONG IN
fabrication_methodCELLULAR, UNEXPLODED
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-R-46089 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-013-1182
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 131182 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
•
SPECIFICATION/STANDARD DATA: 81348-FF-W-84 GOVERNMENT SPECIFICATION AND 96906-MS35337/CANCELED/ GOVERNMENT STANDARD AND 24617-131182 MANUFACTURERS STANDARD
•
DEPARTURE FROM CITED DOCUMENT: FF-W-84,PARAGRAPH 3.3.1 CADMIUM PLATING OR PARAGRAPH 3.3.2 ZINC COATING
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1080 OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
HOLE DIAMETER: 0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
SPECIFICATION/STANDARD DATA81348-FF-W-84 GOVERNMENT SPECIFICATION AND 96906-MS35337/CANCELED/ GOVERNMENT STANDARD AND 24617-131182 MANUFACTURERS STANDARD
DEPARTURE FROM CITED DOCUMENTFF-W-84,PARAGRAPH 3.3.1 CADMIUM PLATING OR PARAGRAPH 3.3.2 ZINC COATING
MATERIALSTEEL COMP 1060 OR STEEL COMP 1080 OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
HOLE DIAMETER0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
MATERIAL THICKNESS0.031 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION66,UNS G10600 THRU UNS G10800 FED STD ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER0.280 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
5310PL0145204Interchangeable
interchangeable cross-reference
interchangeable
2300042Interchangeable
interchangeable cross-reference
interchangeable
453299Interchangeable
interchangeable cross-reference
interchangeable
PS078-0500CRPA022Interchangeable
interchangeable cross-reference
interchangeable
107001-1107Interchangeable
interchangeable cross-reference
interchangeable
13605-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 131182?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 131182?
131182 is a TAPE,SOUND RECORDING.
What parts can replace 131182?
There are 19 known substitutes for 131182: 5310PL0145204, 2300042, 453299 and 16 more. Substitute compatibility should be verified for your specific system.
Is 131182 still available?
131182 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 131182

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026