PartsTable
Technical Data Sheet
Download PDF

131169 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

131169: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include end_item_identification: AUXILIARY SYSTEMS GROUP,LSD 0044. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-926-5885, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
131169
NSN: 5310-00-926-5885
NIINs: 009265885, 012754059
FSC: 5310 — Nuts and Washers
CAGE: 1DF03 — ABM EQUIPMENT, LLC (USA)
SPECIFICATIONS
end_item_identificationAUXILIARY SYSTEMS GROUP,LSD 0044
NSN5310-00-926-5885
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 131169 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 1.799 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
•
HOLE DIAMETER: 1.017 INCHES MINIMUM AND 1.042 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER1.799 INCHES MAXIMUM IN
MATERIAL THICKNESS0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIALSTEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
HOLE DIAMETER1.017 INCHES MINIMUM AND 1.042 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
12387302-53Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS35340-53Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5310009265885Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 131169?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 131169?
131169 is a WASHER,LOCK.
What parts can replace 131169?
There are 3 known substitutes for 131169: 12387302-53, MS35340-53, 5310009265885. Substitute compatibility should be verified for your specific system.
What is the NSN for 131169?
131169 is cataloged in the U.S. Government catalog under NSN 5310-00-926-5885. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 131169