PartsTable
Technical Data Sheet
Download PDF

131141 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

131141: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, overall_width: 0.3870 INCHES MINIMUM AND 0.3920 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-013-1141, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
131141
NSN: 5310-00-013-1141
NIINs: 000131141, 005658016
FSC: 5310 — Nuts and Washers
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 440C OVERALL
bore_shapeSTRAIGHT
bore_diameter0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
overall_width0.3870 INCHES MINIMUM AND 0.3920 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter0.6250 INCHES MINIMUM AND 0.6297 INCHES MAXIMUM IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
internal_fit-up_contact_angular_directionPRIMARILY RADIAL
NSN5310-00-013-1141
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 131141 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.200 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.207 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
MATERIAL: STEEL COMP 1060 OR STEEL COMP 1070 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
•
HOLE DIAMETER: 0.700 INCHES MINIMUM AND 0.726 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.200 INCHES NOMINAL IN
MATERIAL THICKNESS0.207 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
MATERIALSTEEL COMP 1060 OR STEEL COMP 1070 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
HOLE DIAMETER0.700 INCHES MINIMUM AND 0.726 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
FFW84CLASSASTYLE3Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 131141?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 131141?
131141 is a BEARING,BALL,ANNULAR.
What parts can replace 131141?
There is 1 known substitute for 131141: FFW84CLASSASTYLE3. Substitute compatibility should be verified for your specific system.
What is the NSN for 131141?
131141 is cataloged in the U.S. Government catalog under NSN 5310-00-013-1141. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 131141

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.