PartsTable
Technical Data Sheet
Download PDF

131110 — 131110

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

131110: 131110.

The 131110 is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: KDCSLED 1.0 WATT UHF US 470 COMPANION. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-166-1058, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 131110
NSN: 5331-00-166-1058
NIINs: 001661058, 009625620, 016850029
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyKDCSLED 1.0 WATT UHF US 470 COMPANION
NSN5331-00-166-1058
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 131110 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.557 INCHES MINIMUM AND 0.579 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.355 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.557 INCHES MINIMUM AND 0.579 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.355 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
END ITEM IDENTIFICATION5820-01-679-7243 RADIO SET, AN/VRC-135(V)1, HANDHELD, MANPACK AND SMALL FORM FIT (HMS) 2-CHANNEL LEADER RADIO
MATERIALRUBBER FLUOROCARBON CLASS FPM
SUBSTITUTES & CROSS-REFERENCES 8
AS3209-110Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
DS-936300Reference document
Same NSN cross-reference
Reference document — Secondary reference
4680-110Reference document
Same NSN cross-reference
Reference document — Secondary reference
182656Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-110V747-75Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
M83248/1-110Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 131110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 131110?
131110 is a 131110. It is classified as a MRO (MRO_GENERAL).
What parts can replace 131110?
There are 8 known substitutes for 131110: AS3209-110, DS-936300, 4680-110 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 131110?
131110 is cataloged in the U.S. Government catalog under NSN 5331-00-166-1058. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 131110

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.