131070-001: SPACER,PLATE.
The SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, outside_diameter: 10.865 INCHES MINIMUM AND 10.885 INCHES MAXIMUM IN, aperture_diameter: 9.740 INCHES MINIMUM AND 9.760 INCHES MAXIMUM IN, surface_treatment: CHROMATE, bolt_circle_diameter: 10.240 INCHES MINIMUM AND 10.260 INCHES MAXIMUM IN, fsc_application_data: ANTENNA,P/N 131000. This part is cataloged in the U.S.
Government catalog under NSN 5365-01-080-1240, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | ALUMINUM ALLOY 6061 |
| outside_diameter | 10.865 INCHES MINIMUM AND 10.885 INCHES MAXIMUM IN |
| special_features | THE SIX SMALLER HOLES ARE ON A 10.500 IN. HOLE CIRCLE,EQUALLY SPACED,WITH THE REFERENCE (FIRST) HOLE BEING CENTERED 60.0 DEG FROM A LARGER HOLE IN |
| aperture_diameter | 9.740 INCHES MINIMUM AND 9.760 INCHES MAXIMUM IN |
| surface_treatment | CHROMATE |
| bolt_hole_quantity | 4 |
| bolt_circle_diameter | 10.240 INCHES MINIMUM AND 10.260 INCHES MAXIMUM IN |
| fsc_application_data | ANTENNA,P/N 131000 |
| largest_bolt_hole_diameter | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| smallest_bolt_hole_diameter | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN |
| material_document_and_classification | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| surface_treatment_document_and_classification | IL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE A |
| NSN | 5365-01-080-1240 |
| FSC APPLICATION DATA | ANTENNA,P/N 131000 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | IL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE A |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| SMALLEST BOLT HOLE DIAMETER | 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN |
| OUTSIDE DIAMETER | 10.865 INCHES MINIMUM AND 10.885 INCHES MAXIMUM IN |
| APERTURE DIAMETER | 9.740 INCHES MINIMUM AND 9.760 INCHES MAXIMUM IN |
| BOLT HOLE QUANTITY | 4 |
| BOLT CIRCLE DIAMETER | 10.240 INCHES MINIMUM AND 10.260 INCHES MAXIMUM IN |
| SPECIAL FEATURES | THE SIX SMALLER HOLES ARE ON A 10.500 IN. HOLE CIRCLE,EQUALLY SPACED,WITH THE REFERENCE (FIRST) HOLE BEING CENTERED 60.0 DEG FROM A LARGER HOLE IN |
| SURFACE TREATMENT | CHROMATE |
No substitute or cross-reference records for this part.