PartsTable
Technical Data Sheet
Download PDF

131050 — SCISSORS,GENERAL SURGICAL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

131050: SCISSORS,GENERAL SURGICAL.

The SCISSORS,GENERAL SURGICAL is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, thickness: 0.020 INCHES NOMINAL IN, hole_diameter: 0.161 INCHES NOMINAL IN, overall_diameter: 0.281 INCHES NOMINAL IN, surface_treatment: PASSIVATE OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-060-9435, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
131050
NSN: 5310-00-060-9435
NIINs: 000609435, 003651200, 009017677
FSC: 5310 — Nuts and Washers
CAGE: 72582 — ROLLS-ROYCE SOLUTIONS AMERICA INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thickness0.020 INCHES NOMINAL IN
hole_diameter0.161 INCHES NOMINAL IN
overall_diameter0.281 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-060-9435
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 131050 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 2.028 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.312 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1 STYLE AND A CLASS
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER2.028 INCHES MAXIMUM IN
MATERIAL THICKNESS0.312 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1 STYLE AND A CLASS
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIALSTEEL COMP 1060 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1071 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
HOLE DIAMETER1.254 INCHES MINIMUM AND 1.272 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 7
FFW84Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
MS35338-36Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
E108165 FIND NO 254Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
131211Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
MS35338-55Reference document
Same NSN cross-reference
Reference document — Secondary reference
WG105390Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 131050?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 131050?
131050 is a SCISSORS,GENERAL SURGICAL.
What parts can replace 131050?
There are 7 known substitutes for 131050: FFW84, MS35338-36, E108165 FIND NO 254 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 131050?
131050 is cataloged in the U.S. Government catalog under NSN 5310-00-060-9435. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 131050

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.