PartsTable
Technical Data Sheet
PartsTable / MRO / 131000-002
131000-002 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

STRAP,WRIST,ELECTROSTATIC DISCHA. Key specifications include special_features: 24.00 IN. LG,19.00 IN.

W,12.5 TO 75.0 IPS,REWIND 150.0 IPS,115 OR 230 VAC,48 TO 60 HZ,300 WATTS MAX,80 LBS WT VAC. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-003-9407, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 131000-002
NSN: 5310-00-003-9407
FSC: 5310
CAGE: 60119 — MONADNOCK COMPANY, THE DBA LISI AEROSPACE (USA)
SPECIFICATIONS
special_features24.00 IN. LG,19.00 IN. W,12.5 TO 75.0 IPS,REWIND 150.0 IPS,115 OR 230 VAC,48 TO 60 HZ,300 WATTS MAX,80 LBS WT VAC
NSN5310-00-003-9407
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 131000-002 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT WIDTH: 0.380 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OR QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
NUT STYLE: SHEET SPRING
•
MATERIAL: STEEL OVERALL
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATING MEMBER DIAMETER ACCOMMODATED: 0.190 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
NUT WIDTH0.380 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OR QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SPECIAL FEATURESSELF-LOCKING FEATURE INCLUDED
NUT STYLESHEET SPRING
MATERIALSTEEL OVERALL
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATING MEMBER DIAMETER ACCOMMODATED0.190 INCHES NOMINAL IN
PANEL THICKNESS0.105 INCHES NOMINAL IN
NUT LENGTH0.680 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
457-6031Interchangeable
interchangeable cross-reference
interchangeable
971003-221Interchangeable
interchangeable cross-reference
interchangeable
N8480Interchangeable
interchangeable cross-reference
interchangeable
350119Interchangeable
interchangeable cross-reference
interchangeable
131000-002Interchangeable
interchangeable cross-reference
interchangeable
3100000-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 131000-002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 131000-002?
131000-002 is a STRAP,WRIST,ELECTROSTATIC DISCHA. It is classified as a MRO (MRO_GENERAL).
What parts can replace 131000-002?
There are 13 known substitutes for 131000-002: 457-6031, 971003-221, N8480 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 131000-002?
131000-002 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-003-9407. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 131000-002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026