PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1310-1001ITEM22
1310-1001ITEM22 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 0.441 INCHES NOMINAL IN, center_hole_diameter: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-387-6687, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1310-1001ITEM22
NSN: 5330-01-387-6687
FSC: 5330
CAGE: 66573 — CIRCOR AEROSPACE, INC. DBA CIRCLE SEAL CONTROLS USE CAGE CODE 91816 FOR CATALOGING (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
hardness_rating75.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter0.441 INCHES NOMINAL IN
center_hole_diameter0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
departure_from_cited_documentMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS
criticality_code_justificationZZZW
NSN5330-01-387-6687
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1310-1001ITEM22 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM OVERALL
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL OVERALL
•
PERIPHERAL DIAMETER: 0.441 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
DEPARTURE FROM CITED DOCUMENT: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
CRITICALITY CODE JUSTIFICATIONZZZW
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL OVERALL
PERIPHERAL DIAMETER0.441 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
DEPARTURE FROM CITED DOCUMENTMATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
M83248/1-011Interchangeable
interchangeable cross-reference
interchangeable
10017039Interchangeable
interchangeable cross-reference
interchangeable
10017001Interchangeable
interchangeable cross-reference
interchangeable
388064Interchangeable
interchangeable cross-reference
interchangeable
MS9388-011Interchangeable
interchangeable cross-reference
interchangeable
AS568-011MILG23652TY1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1310-1001ITEM22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1310-1001ITEM22?
1310-1001ITEM22 is a PACKING,PREFORMED.
What parts can replace 1310-1001ITEM22?
There are 18 known substitutes for 1310-1001ITEM22: M83248/1-011, 10017039, 10017001 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1310-1001ITEM22?
1310-1001ITEM22 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-387-6687. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1310-1001ITEM22

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026