PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 131-404
131-404 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CARRIER,CLUTCH RELEASE BEARING is a the manufacturer industrial component. Key specifications include physical_form: LIQUID, special_features: TEN 1 QUART BOTTLES PER BOX, unit_package_content_form: SINGLE UNIT FOR MIXING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-013-1404, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
131-404
NSN: 5310-00-013-1404
FSC: 5310
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
physical_formLIQUID
special_featuresTEN 1 QUART BOTTLES PER BOX
end_item_identificationDIRECT VENDOR DELIVERY (DVD), MODEL XM1117, ARMORED SECURITY VEHICLE (ASV), NSN 2320-01-437-6957, CAGE 10237, PART NUMBER 216098, TM 9-2320-307-24P, CONTRACT DAAE07-99-C-S001
unit_package_content_formSINGLE UNIT FOR MIXING
NSN5310-00-013-1404
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 131-404 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.438 INCHES NOMINAL IN
•
NUT STYLE: CAP
•
THREAD QUANTITY PER INCH: 20
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
BEARING SURFACE TYPE: CHAMFERED
•
THREAD DIRECTION: RIGHT-HAND
•
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 15 STYLE
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH ACROSS FLATS0.438 INCHES NOMINAL IN
NUT STYLECAP
THREAD QUANTITY PER INCH20
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD SIZE0.250 INCHES IN
BEARING SURFACE TYPECHAMFERED
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 15 STYLE
MATERIALSTEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633-CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
131-404Interchangeable
interchangeable cross-reference
interchangeable
11 6014Interchangeable
interchangeable cross-reference
interchangeable
FFN836Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 131-404?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 131-404?
131-404 is a CARRIER,CLUTCH RELEASE BEARING.
What parts can replace 131-404?
There are 3 known substitutes for 131-404: 131-404, 11 6014, FFN836. Substitute compatibility should be verified for your specific system.
What is the NSN for 131-404?
131-404 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-013-1404. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 131-404

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026