PartsTable
Technical Data Sheet
PartsTable / MRO / 131-0908
131-0908 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

CAPACITOR,FIXED,MICA DIELECTRIC. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.370 INCHES MAXIMUM IN, seat_angle: 37.0 DEGREES FIRST END, body_height: 0.110 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, body_length: 0.400 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-226-8568, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 131-0908
NSN: 4720-00-226-8568
FSC: 4720
CAGE: 77237 — DANA OFF HIGHWAY PRODUCTS, LLC (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width0.370 INCHES MAXIMUM IN
seat_angle37.0 DEGREES FIRST END
body_height0.110 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
body_length0.400 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B FIRST END
exterior_colorBLACK
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.375 INCHES NOMINAL IN
terminal_length1.000 INCHES MINIMUM IN
NSN4720-00-226-8568
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 131-0908 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LAYER COMPOSITION AND LOCATION: OUTER LAYER MOLDED RUBBER, SYNTHETIC AND 1ST LAYER BRAIDED WIRE
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
EXTERIOR COLOR: BLACK
•
BURST TEST PRESSURE: 9000.0 POUNDS PER SQUARE INCH LBS
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
MINIMUM INSIDE BENDING RADIUS: 5.000 INCHES IN
•
OUTSIDE DIAMETER: 0.795 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
LAYER COMPOSITION AND LOCATIONOUTER LAYER MOLDED RUBBER, SYNTHETIC AND 1ST LAYER BRAIDED WIRE
END CONNECTION DESIGNSTRAIGHT FIRST END
EXTERIOR COLORBLACK
BURST TEST PRESSURE9000.0 POUNDS PER SQUARE INCH LBS
THREAD DIRECTIONRIGHT-HAND FIRST END
CROSS-SECTIONAL SHAPE STYLEROUND
MINIMUM INSIDE BENDING RADIUS5.000 INCHES IN
OUTSIDE DIAMETER0.795 INCHES NOMINAL IN
INSIDE DIAMETER0.375 INCHES NOMINAL IN
MEASURING METHOD AND LENGTH22.000 INCHES NOMINAL OVERALL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
HP15151J301Interchangeable
interchangeable cross-reference
interchangeable
CMR05F151J0DRInterchangeable
interchangeable cross-reference
interchangeable
20032Interchangeable
interchangeable cross-reference
interchangeable
007743028Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 131-0908?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 131-0908?
131-0908 is a CAPACITOR,FIXED,MICA DIELECTRIC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 131-0908?
There are 4 known substitutes for 131-0908: HP15151J301, CMR05F151J0DR, 20032 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 131-0908?
131-0908 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-226-8568. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 131-0908

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026