PartsTable / O-RING / 130981-34N
130981-34N
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 3.060 INCHES MINIMUM AND 3.120 INCHES MAXIMUM IN, center_hole_diameter: 2.790 INCHES MINIMUM AND 2.834 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-630-4215, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
130981-34N
NSN: 5331-00-630-4215 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR temp_rating -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF hardness_rating 70.0 SHORE DUROMETER A NOMINAL outside_diameter 3.060 INCHES MINIMUM AND 3.120 INCHES MAXIMUM IN center_hole_diameter 2.790 INCHES MINIMUM AND 2.834 INCHES MAXIMUM IN elongation_percentage 331 MAXIMUM cross-sectional_height 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN NSN 5331-00-630-4215
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 130981-34N
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
• CENTER HOLE DIAMETER: 2.790 INCHES MINIMUM AND 2.834 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 3.060 INCHES MINIMUM AND 3.120 INCHES MAXIMUM IN
• HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
• ELONGATION PERCENTAGE: 331 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF CENTER HOLE DIAMETER 2.790 INCHES MINIMUM AND 2.834 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN OUTSIDE DIAMETER 3.060 INCHES MINIMUM AND 3.120 INCHES MAXIMUM IN HARDNESS RATING 70.0 SHORE DUROMETER A NOMINAL ELONGATION PERCENTAGE 331 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
5704 Interchangeable interchangeable cross-reference
interchangeable
9336 Interchangeable interchangeable cross-reference
interchangeable
09336000 Interchangeable interchangeable cross-reference
interchangeable
8518392 Interchangeable interchangeable cross-reference
interchangeable
MIL-E-1/464 Interchangeable interchangeable cross-reference
interchangeable
4820PL0777959 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 130981-34N?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 130981-34N?
130981-34N is a O-RING.
What parts can replace 130981-34N?
There are 12 known substitutes for 130981-34N: 5704, 9336, 09336000 and 9 more. Substitute compatibility should be verified for your specific system.
Is 130981-34N still available?
130981-34N is currently cancelled.
Request a Quote — 130981-34N