PartsTable
Technical Data Sheet
1308669 ✓ Verified by PartsTable
· MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a the manufacturer industrial component. Key specifications include material: CORK OVERALL, body_length: 2.000 INCHES NOMINAL IN, body_diameter: 0.625 INCHES NOMINAL IN, terminal_type: TAB, SOLDER LUG, inclosure_type: ENCAPSULATED, terminal_length: 0.562 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-010-7960, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 1308669
NSN: 5330-00-010-7960
FSC: 5330
CAGE: 89749 — CLARK MATERIAL HANDLING COMPANY (USA)
SPECIFICATIONS
materialCORK OVERALL
body_length2.000 INCHES NOMINAL IN
body_diameter0.625 INCHES NOMINAL IN
terminal_typeTAB, SOLDER LUG
inclosure_typeENCAPSULATED
terminal_length0.562 INCHES NOMINAL IN
outside_diameter5.625 INCHES NOMINAL IN
style_designatorRADIAL TERMINAL EACH END
aperture_diameter5.250 INCHES NOMINAL IN
electrical_resistance3.000 KILOHMS
reactance_characteristicINDUCTIVE
cross-sectional_thickness0.062 INCHES NOMINAL IN
NSN5330-00-010-7960
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1308669 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: CORK OVERALL
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
STYLE DESIGNATOR: CIRCULAR
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
APERTURE DIAMETER: 5.250 INCHES NOMINAL IN
OUTSIDE DIAMETER: 5.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCORK OVERALL
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER5.250 INCHES NOMINAL IN
OUTSIDE DIAMETER5.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
516-4105-475712PC156Interchangeable
interchangeable cross-reference
interchangeable
45J174PC15Interchangeable
interchangeable cross-reference
interchangeable
45J179PC6AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1308669?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1308669?
1308669 is a RESISTOR,FIXED,WIRE WOUND. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1308669?
There are 3 known substitutes for 1308669: 516-4105-475712PC156, 45J174PC15, 45J179PC6A. Substitute compatibility should be verified for your specific system.
What is the NSN for 1308669?
1308669 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-010-7960. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1308669