13084020 — BEARING,BALL,DUPLEX

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

13084020: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: OIL LUBRICATION, bore_diameter: 10.9992 INCHES MINIMUM AND 11.0000 INCHES MAXIMUM IN, contact_angle: 30.0 DEGREES NOMINAL, overall_width: 0.4850 INCHES MINIMUM AND 0.4900 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-183-4096, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

13084020

NSN: 3110-01-183-4096
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 32828 — KAYDON CORPORATION DBA KAYDON CORP (USA)

SPECIFICATIONS

material	OIL LUBRICATION
bore_diameter	10.9992 INCHES MINIMUM AND 11.0000 INCHES MAXIMUM IN
contact_angle	30.0 DEGREES NOMINAL
overall_width	0.4850 INCHES MINIMUM AND 0.4900 INCHES MAXIMUM IN
load_direction	ANGULAR
surface_finish	GROUND
special_features	24 DROPS OF SPECIFIED LUBRICANT FROM A NO. 26 HYPODERMIC NEEDLE
style_designator	COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
surface_treatment	PASSIVATE INNER RING
bearing_preload_rating	180.0 POUNDS MINIMUM AND 260.0 POUNDS MAXIMUM LBS
overall_outside_diameter	11.4992 INCHES MINIMUM AND 11.5000 INCHES MAXIMUM IN
internal_fit-up_designation	STANDARD
NSN	3110-01-183-4096

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: MACHINED

•

BEARING PRELOAD RATING: 180.0 POUNDS MINIMUM AND 260.0 POUNDS MAXIMUM LBS

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING

•

INTERNAL FIT-UP DESIGNATION: STANDARD

•

SURFACE FINISH: GROUND

•

STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	MACHINED
BEARING PRELOAD RATING	180.0 POUNDS MINIMUM AND 260.0 POUNDS MAXIMUM LBS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE INNER RING
INTERNAL FIT-UP DESIGNATION	STANDARD
SURFACE FINISH	GROUND
STYLE DESIGNATOR	COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
MATERIAL DOCUMENT AND CLASSIFICATION	UNABLE TO DECODE
OVERALL WIDTH	0.4850 INCHES MINIMUM AND 0.4900 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 3

1308020Reference document

Same NSN cross-reference

Reference document — Secondary reference

13216201Reference document

Same NSN cross-reference

Reference document — Secondary reference

3TAR-176-184-5Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 13084020?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 13084020?

13084020 is a BEARING,BALL,DUPLEX.

What parts can replace 13084020?

There are 3 known substitutes for 13084020: 1308020, 13216201, 3TAR-176-184-5. Substitute compatibility should be verified for your specific system.

What is the NSN for 13084020?

13084020 is cataloged in the U.S. Government catalog under NSN 3110-01-183-4096. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

13084020 — BEARING,BALL,DUPLEX

Request a Quote — 13084020