PartsTable
Technical Data Sheet
Download PDF

13082794-25 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

13082794-25: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.625 INCHES NOMINAL IN, height: 1.000 INCHES NOMINAL IN, length: 1.250 INCHES NOMINAL IN, thread_class: 2B, hole_diameter: 0.505 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, furnished_items: LOCKNUT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-273-2386, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13082794-25
NSN: 5340-01-273-2386
FSC: 5340 — Hardware, Commercial
CAGE: 04939 — LOCKHEED MARTIN CORPORATION (USA)
SPECIFICATIONS
width0.625 INCHES NOMINAL IN
height1.000 INCHES NOMINAL IN
length1.250 INCHES NOMINAL IN
thread_class2B
hole_diameter0.505 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
furnished_itemsLOCKNUT
nominal_thread_size0.086 INCHES IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5340-01-273-2386
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13082794-25 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.250 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.086 INCHES IN
•
HEIGHT: 1.000 INCHES NOMINAL IN
•
WIDTH: 0.625 INCHES NOMINAL IN
•
THREAD CLASS: 2B
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.505 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH1.250 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.086 INCHES IN
HEIGHT1.000 INCHES NOMINAL IN
WIDTH0.625 INCHES NOMINAL IN
THREAD CLASS2B
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.505 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 13082794-25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13082794-25?
13082794-25 is a CLAMP,SYNCHRO.
What is the NSN for 13082794-25?
13082794-25 is cataloged in the U.S. Government catalog under NSN 5340-01-273-2386. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13082794-25

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.