PartsTable
Technical Data Sheet
Download PDF

13080208 — SEAL,NONMETALLIC ROUND SECTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

13080208: SEAL,NONMETALLIC ROUND SECTION.

The SEAL,NONMETALLIC ROUND SECTION is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, construction: SPLIT, style_designator: CIRCULAR, aperture_diameter: 1.560 INCHES MINIMUM AND 1.590 INCHES MAXIMUM IN, cross-sectional_width: 1.160 INCHES NOMINAL IN, cross-sectional_height: 1.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-325-2015, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13080208
NSN: 5330-01-325-2015
FSC: 5330 — Packing and Gasket Materials
CAGE: 04939 — LOCKHEED MARTIN CORPORATION (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
constructionSPLIT
style_designatorCIRCULAR
aperture_diameter1.560 INCHES MINIMUM AND 1.590 INCHES MAXIMUM IN
cross-sectional_width1.160 INCHES NOMINAL IN
cross-sectional_height1.750 INCHES NOMINAL IN
end_item_identificationUSED ON PILOT NIGHT VISION SENSOR
cross-sectional_shape_styleU
NSN5330-01-325-2015
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13080208 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 1.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 1.160 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: U
•
APERTURE DIAMETER: 1.560 INCHES MINIMUM AND 1.590 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
•
CONSTRUCTION: SPLIT
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT1.750 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH1.160 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLEU
APERTURE DIAMETER1.560 INCHES MINIMUM AND 1.590 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONUSED ON PILOT NIGHT VISION SENSOR
MATERIALRUBBER SILICONE CLASS Q OVERALL
CONSTRUCTIONSPLIT
SUBSTITUTES & CROSS-REFERENCES 1
14-00033Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy 13080208?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13080208?
13080208 is a SEAL,NONMETALLIC ROUND SECTION.
What parts can replace 13080208?
There is 1 known substitute for 13080208: 14-00033. Substitute compatibility should be verified for your specific system.
What is the NSN for 13080208?
13080208 is cataloged in the U.S. Government catalog under NSN 5330-01-325-2015. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13080208

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.