PartsTable
Technical Data Sheet
Download PDF

13080197 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

13080197: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN, first_leg_length: 0.500 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN, second_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-179-2701, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13080197
NSN: 5340-01-179-2701
FSC: 5340 — Hardware, Commercial
CAGE: 04939 — LOCKHEED MARTIN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 302
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
first_leg_length0.500 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
second_leg_styleSQUARE
second_leg_width0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
special_features0.03 R BEND
style_designatorANGLE
second_leg_length0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
surface_treatmentPASSIVATE
mounting_hole_typePLAIN
NSN5340-01-179-2701
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13080197 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.140 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE
•
SECOND LEG WIDTH: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
TECHNICAL CHARACTERISTICS
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.140 INCHES MINIMUM AND 0.149 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM A380 ASSN STD SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
SECOND LEG LENGTH0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
SUPPLEMENTARY FEATURESPROTECTOR,PULLEY
STYLE DESIGNATORANGLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 13080197?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13080197?
13080197 is a BRACKET,ANGLE.
What is the NSN for 13080197?
13080197 is cataloged in the U.S. Government catalog under NSN 5340-01-179-2701. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13080197

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.