PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1307R
1307R ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 21.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-107-7566, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1307R
NSN: 3110-00-107-7566
FSC: 3110
CAGE: 21760 — SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width21.0 MILLIMETERS NOMINAL MM
seal_quantity1
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
overall_outside_diameter80.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
nondefinitive_spec/std_dataIII TYPE AND 7 CLASS AND 00 GRADE
NSN3110-00-107-7566
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1307R · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 80.00 MILLIMETERS NOMINAL MM
•
BORE DIAMETER: 35.00 MILLIMETERS NOMINAL MM
•
SEAL QUANTITY: 1
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LOAD DIRECTION: RADIAL
•
BORE SHAPE: STRAIGHT
•
MATERIAL: STEEL RETAINER
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER80.00 MILLIMETERS NOMINAL MM
BORE DIAMETER35.00 MILLIMETERS NOMINAL MM
SEAL QUANTITY1
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONRADIAL
BORE SHAPESTRAIGHT
MATERIALSTEEL RETAINER
MATERIALSTEEL INNER RING
MATERIALRUBBER SYNTHETIC SEAL
MATERIALSTEEL BALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
AA1011Interchangeable
interchangeable cross-reference
interchangeable
9613Interchangeable
interchangeable cross-reference
interchangeable
9307Interchangeable
interchangeable cross-reference
interchangeable
9607Interchangeable
interchangeable cross-reference
interchangeable
118-3-1Interchangeable
interchangeable cross-reference
interchangeable
99504ANG25Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1307R?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1307R?
1307R is a BEARING,BALL,ANNULAR.
What parts can replace 1307R?
There are 27 known substitutes for 1307R: AA1011, 9613, 9307 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1307R?
1307R is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-107-7566. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1307R

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026