PartsTable
Technical Data Sheet
Download PDF

13076066 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

13076066: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.500 INCHES NOMINAL IN, height: 0.620 INCHES NOMINAL IN, length: 4.480 INCHES NOMINAL IN, material: ALUMINUM ALLOY 5052, hole_diameter: 0.193 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN, furnished_items: LOCKNUT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-204-7885, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13076066
NSN: 5340-01-204-7885
FSC: 5340 — Hardware, Commercial
CAGE: 04939 — LOCKHEED MARTIN CORPORATION (USA)
SPECIFICATIONS
width0.500 INCHES NOMINAL IN
height0.620 INCHES NOMINAL IN
length4.480 INCHES NOMINAL IN
materialALUMINUM ALLOY 5052
hole_diameter0.193 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN
furnished_itemsLOCKNUT
outside_diameter0.250 INCHES NOMINAL IN
surface_treatmentANODIZE
material_document_and_classificationQQ-A-250/8,TEMPER 4 FED SPEC SINGLE MATERIAL RESPONSE
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE
NSN5340-01-204-7885
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13076066 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 4.480 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/8,TEMPER 4 FED SPEC SINGLE MATERIAL RESPONSE
•
OUTSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
HEIGHT: 0.620 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE
•
WIDTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 5052
TECHNICAL CHARACTERISTICS
LENGTH4.480 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/8,TEMPER 4 FED SPEC SINGLE MATERIAL RESPONSE
OUTSIDE DIAMETER0.250 INCHES NOMINAL IN
HEIGHT0.620 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE
WIDTH0.500 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 5052
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.193 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 13076066?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13076066?
13076066 is a CLAMP,SYNCHRO.
What is the NSN for 13076066?
13076066 is cataloged in the U.S. Government catalog under NSN 5340-01-204-7885. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13076066

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.