PartsTable
Technical Data Sheet
Download PDF

13075520 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

13075520: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, overall_width: 1.060 INCHES NOMINAL IN, special_features: APERTURE 0.500 IN. MIN 0.510 IN.

MAX DIA IN, surface_treatment: ANODIZE, mounting_hole_type: PLAIN, mounting_hole_diameter: 0.200 INCHES MINIMUM AND 0.206 INCHES MAXIMUM IN. This part is cataloged in the U.S. Government catalog under NSN 5340-01-387-9071, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13075520
NSN: 5340-01-387-9071
FSC: 5340 — Hardware, Commercial
CAGE: 04939 — LOCKHEED MARTIN CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
overall_width1.060 INCHES NOMINAL IN
special_featuresAPERTURE 0.500 IN. MIN 0.510 IN. MAX DIA IN
surface_treatmentANODIZE
mounting_hole_typePLAIN
mounting_hole_diameter0.200 INCHES MINIMUM AND 0.206 INCHES MAXIMUM IN
mounting_hole_quantity4
material_document_and_classificationQQ-A-250/11 T651 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-387-9071
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13075520 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 4
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11 T651 FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.200 INCHES MINIMUM AND 0.206 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE
•
MATERIAL: ALUMINUM ALLOY 6061
•
MOUNTING HOLE TYPE: PLAIN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY4
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11 T651 FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.200 INCHES MINIMUM AND 0.206 INCHES MAXIMUM IN
OVERALL WIDTH1.060 INCHES NOMINAL IN
SPECIAL FEATURESAPERTURE 0.500 IN. MIN 0.510 IN. MAX DIA IN
SURFACE TREATMENTANODIZE
MATERIALALUMINUM ALLOY 6061
MOUNTING HOLE TYPEPLAIN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy 13075520?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13075520?
13075520 is a BRACKET,MOUNTING.
What is the NSN for 13075520?
13075520 is cataloged in the U.S. Government catalog under NSN 5340-01-387-9071. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13075520