PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1306SA
1306SA ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 30.00 MILLIMETERS NOMINAL MM, overall_width: 19.0 MILLIMETERS NOMINAL MM, alignment_type: SELF-ALIGNING, load_direction: ANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-3222, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1306SA
NSN: 3110-00-554-3222
FSC: 3110
CAGE: 21760 — SCHATZ BEARING CORPORATION DBA SCHATZ BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter30.00 MILLIMETERS NOMINAL MM
overall_width19.0 MILLIMETERS NOMINAL MM
alignment_typeSELF-ALIGNING
load_directionANGULAR
surface_finishGROUND
style_designatorNON-SEPARABLE
self-alignment_locationINTERNAL
overall_outside_diameter72.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-00-554-3222
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1306SA · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-SEPARABLE
•
LOAD DIRECTION: ANGULAR
•
ALIGNMENT TYPE: SELF-ALIGNING
•
SELF-ALIGNMENT LOCATION: INTERNAL
•
BORE DIAMETER: 30.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
OVERALL WIDTH19.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-SEPARABLE
LOAD DIRECTIONANGULAR
ALIGNMENT TYPESELF-ALIGNING
SELF-ALIGNMENT LOCATIONINTERNAL
BORE DIAMETER30.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONINWARD CONVERGENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
N52255P24Interchangeable
interchangeable cross-reference
interchangeable
2606Interchangeable
interchangeable cross-reference
interchangeable
B151-8Interchangeable
interchangeable cross-reference
interchangeable
516-057425Interchangeable
interchangeable cross-reference
interchangeable
L306Interchangeable
interchangeable cross-reference
interchangeable
8945655-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1306SA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1306SA?
1306SA is a BEARING,BALL,ANNULAR.
What parts can replace 1306SA?
There are 12 known substitutes for 1306SA: N52255P24, 2606, B151-8 and 9 more. Substitute compatibility should be verified for your specific system.
Is 1306SA still available?
1306SA is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1306SA

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026