PartsTable
Technical Data Sheet
Download PDF

13059525 — HOLDER,ROLLER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

13059525: HOLDER,ROLLER.

The HOLDER,ROLLER is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, overall_width: 3.290 INCHES MINIMUM AND 3.310 INCHES MAXIMUM IN, overall_length: 1.210 INCHES MINIMUM AND 1.230 INCHES MAXIMUM IN, surface_treatment: PASSIVATE, attachment_to_item_supported_method: BRAZED PER MIL-B-7883,TYPE I OR TYPE II,GRADE A OR BNI-2 PER AMS 4777. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-136-4603, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13059525
NSN: 5340-01-136-4603
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_width3.290 INCHES MINIMUM AND 3.310 INCHES MAXIMUM IN
overall_length1.210 INCHES MINIMUM AND 1.230 INCHES MAXIMUM IN
surface_treatmentPASSIVATE
attachment_to_item_supported_methodBRAZED PER MIL-B-7883,TYPE I OR TYPE II,GRADE A OR BNI-2 PER AMS 4777
NSN5340-01-136-4603
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13059525 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ATTACHMENT TO ITEM SUPPORTED METHOD: BRAZED PER MIL-B-7883,TYPE I OR TYPE II,GRADE A OR BNI-2 PER AMS 4777
•
SURFACE TREATMENT: PASSIVATE
•
MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
OVERALL LENGTH1.210 INCHES MINIMUM AND 1.230 INCHES MAXIMUM IN
OVERALL WIDTH3.290 INCHES MINIMUM AND 3.310 INCHES MAXIMUM IN
ATTACHMENT TO ITEM SUPPORTED METHODBRAZED PER MIL-B-7883,TYPE I OR TYPE II,GRADE A OR BNI-2 PER AMS 4777
SURFACE TREATMENTPASSIVATE
MATERIALSTEEL CORROSION RESISTING
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 13059525?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13059525?
13059525 is a HOLDER,ROLLER.
What is the NSN for 13059525?
13059525 is cataloged in the U.S. Government catalog under NSN 5340-01-136-4603. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13059525