PartsTable
Technical Data Sheet
Download PDF

130552 — TERMINAL,LUG

✓ Government record, cited
— · MOTOR
PRODUCT OVERVIEW

130552: TERMINAL,LUG.

The TERMINAL,LUG is a the manufacturer industrial component. Key specifications include material: TIN OVERALL, duty_cycle: INTERMITTENT, temp_rating: -55.0 OPERATING CELSIUS AND 150.0 OPERATING CELSIUS, winding_type: PERMANENT MAGNET, overall_width: 11.9 MILLIMETERS MM, time_interval: 1.0 MINUTES MAXIMUM ON AND 5.0 MINUTES MINIMUM OFF. This part is cataloged in the U.S.

Government catalog under NSN 6105-00-103-6481, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
130552
NSN: 6105-00-103-6481
NIINs: 001036481, 016750692
FSC: 6105 — Motors, Electrical
CAGE: 16636 — TITAN CORP THE (USA)
SPECIFICATIONS
materialTIN OVERALL
duty_cycleINTERMITTENT
temp_rating-55.0 OPERATING CELSIUS AND 150.0 OPERATING CELSIUS
winding_typePERMANENT MAGNET
overall_width11.9 MILLIMETERS MM
time_interval1.0 MINUTES MAXIMUM ON AND 5.0 MINUTES MINIMUM OFF
cooling_methodNONVENTILATED
overall_height1.249 INCHES IN
overall_length29.7 MILLIMETERS MM
shaft_diameter0.093 INCHES NOMINAL SINGLE END IN
teeth_quantity12 SINGLE END
mounting_methodFACE
NSN6105-00-103-6481
COMPONENT DIAGRAM
ELECTRIC MOTOR — FRAME SIZE = MOUNTING PATTERN SHAFT J-BOX MOUNTING FEET — FRAME — — · — RPM — · — PN: 130552 · OEM ⚠ VERIFY BEFORE ORDERING NEMA frame size determines mounting bolt pattern — not interchangeable. 56C ≠ 143T bolt pattern. C-face vs foot-mount vs flange — different mounting, same HP doesn't mean drop-in ✓ BROKER TIP TEFC = outdoor/washdown OK. ODP = dry indoor only. TENV = no external fan, explosion-proof areas. 1750 RPM = 4-pole (most common), 3450 RPM = 2-pole, 1150 RPM = 6-pole PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY TYPE AND QUANTITY: 2 THREADED HOLE(S)
•
DUTY CYCLE: INTERMITTENT
•
SHAFT DIAMETER: 0.093 INCHES NOMINAL SINGLE END IN
•
TEETH QUANTITY: 12 SINGLE END
•
WINDING TYPE: PERMANENT MAGNET
•
MOUNTING METHOD: FACE
•
COOLING METHOD: NONVENTILATED
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY TYPE AND QUANTITY2 THREADED HOLE(S)
DUTY CYCLEINTERMITTENT
SHAFT DIAMETER0.093 INCHES NOMINAL SINGLE END IN
TEETH QUANTITY12 SINGLE END
OVERALL LENGTH2.900 INCHES IN
WINDING TYPEPERMANENT MAGNET
MOUNTING METHODFACE
COOLING METHODNONVENTILATED
TIME INTERVAL1.0 MINUTES MAXIMUM ON AND 5.0 MINUTES MINIMUM OFF
SHAFT ROTATION DIRECTIONCLOCKWISE OR COUNTERCLOCKWISE SINGLE END
SUBSTITUTES & CROSS-REFERENCES 2
25A775Reference document
Same NSN cross-reference
Reference document — Secondary reference
230-0534-070Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy 130552?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 130552?
130552 is a TERMINAL,LUG.
What parts can replace 130552?
There are 2 known substitutes for 130552: 25A775, 230-0534-070. Substitute compatibility should be verified for your specific system.
What is the NSN for 130552?
130552 is cataloged in the U.S. Government catalog under NSN 6105-00-103-6481. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 130552