PartsTable
Technical Data Sheet
Download PDF

130397 — SANDBAG SET,CERVICAL,X-RAY

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

130397: SANDBAG SET,CERVICAL,X-RAY.

The SANDBAG SET,CERVICAL,X-RAY is a the manufacturer industrial component. Key specifications include width: 11.000 INCHES NOMINAL IN, length: 18.000 INCHES NOMINAL IN, material: STEEL, inside_width: 8.500 INCHES NOMINAL IN, corner_radius: 0.328 INCHES NOMINAL IN, inside_length: 16.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-363-8040, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 130397
NSN: 5340-00-363-8040
NIINs: 003638040, 005459399, 006114895, 014271119, 014486988
FSC: 5340 — Hardware, Commercial
CAGE: 72962 — HARVARD INDUSTRIES INC (USA)
SPECIFICATIONS
width11.000 INCHES NOMINAL IN
length18.000 INCHES NOMINAL IN
materialSTEEL
inside_width8.500 INCHES NOMINAL IN
corner_radius0.328 INCHES NOMINAL IN
inside_length16.000 INCHES NOMINAL IN
body_thickness0.259 INCHES NOMINAL IN
inverted_radius1.750 INCHES NOMINAL IN
flange_thickness0.330 INCHES NOMINAL IN
special_featuresBRAND NAME DESCRIPTION AQ1 - 6 GAUGE;ADDITIONAL ITEM INFORMATION AQ1 11-1/16 X 13-3/8 X .006,R;REQUIRED MINIMUM ORDER QUANTITY 1;REQUIRED MULTIPLE ORDER QUANTITY 1
fsc_application_dataTELETYPE AND FACSIMILE EQUIPMENT
inside_corner_radius1.500 INCHES NOMINAL IN
NSN5340-00-363-8040
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 130397 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 2.884 INCHES NOMINAL IN
•
INSIDE WIDTH: 8.500 INCHES NOMINAL IN
•
CORNER RADIUS: 0.328 INCHES NOMINAL IN
•
LENGTH: 18.000 INCHES NOMINAL IN
•
INSIDE LENGTH: 16.000 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 3.589 INCHES MINIMUM AND 4.236 INCHES MAXIMUM IN
•
FLANGE THICKNESS: 0.330 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 1.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH2.884 INCHES NOMINAL IN
INSIDE WIDTH8.500 INCHES NOMINAL IN
CORNER RADIUS0.328 INCHES NOMINAL IN
LENGTH18.000 INCHES NOMINAL IN
INSIDE LENGTH16.000 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG LENGTH3.589 INCHES MINIMUM AND 4.236 INCHES MAXIMUM IN
FLANGE THICKNESS0.330 INCHES NOMINAL IN
INSIDE CORNER RADIUS1.500 INCHES NOMINAL IN
FIRST RECESS INSIDE HEIGHT2.388 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG WIDTH3.133 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
1303907Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5159440Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 130397?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 130397?
130397 is a SANDBAG SET,CERVICAL,X-RAY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 130397?
There are 2 known substitutes for 130397: 1303907, 5159440. Substitute compatibility should be verified for your specific system.
What is the NSN for 130397?
130397 is cataloged in the U.S. Government catalog under NSN 5340-00-363-8040. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 130397

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.