PartsTable
Technical Data Sheet
Download PDF

13032587 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

13032587: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 5052, first_leg_style: SQUARE, first_leg_width: 25.00 MILLIMETERS NOMINAL MM, first_leg_length: 31.00 MILLIMETERS NOMINAL MM, style_designator: ANGLE, first_leg_hole_arrangement_style: TWO HOLES. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-131-5519, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13032587
NSN: 5340-01-131-5519
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 5052
first_leg_styleSQUARE
first_leg_width25.00 MILLIMETERS NOMINAL MM
first_leg_length31.00 MILLIMETERS NOMINAL MM
style_designatorANGLE
first_leg_hole_arrangement_styleTWO HOLES
material_document_and_classificationQQ-A-25015 FED SPEC ALL MATERIAL RESPONSES
NSN5340-01-131-5519
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13032587 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: SQUARE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-25015 FED SPEC ALL MATERIAL RESPONSES
•
FIRST LEG LENGTH: 31.00 MILLIMETERS NOMINAL MM
•
FIRST LEG WIDTH: 25.00 MILLIMETERS NOMINAL MM
•
MATERIAL: ALUMINUM ALLOY 5052
TECHNICAL CHARACTERISTICS
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
STYLE DESIGNATORANGLE
FIRST LEG STYLESQUARE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-25015 FED SPEC ALL MATERIAL RESPONSES
FIRST LEG LENGTH31.00 MILLIMETERS NOMINAL MM
FIRST LEG WIDTH25.00 MILLIMETERS NOMINAL MM
MATERIALALUMINUM ALLOY 5052
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 13032587?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13032587?
13032587 is a BRACKET,ANGLE.
What is the NSN for 13032587?
13032587 is cataloged in the U.S. Government catalog under NSN 5340-01-131-5519. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13032587