PartsTable
Technical Data Sheet
Download PDF

13030286 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

13030286: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include width: 245.0 MILLIMETERS NOMINAL MM, length: 292.0 MILLIMETERS NOMINAL MM, material: ALUMINUM ALLOY 6061, thickness: 2.30 MILLIMETERS NOMINAL MM, special_features: ALUM ALLOY 6061-T6 PER QQ-A-250/11, material_document_and_classification: QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-147-3243, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13030286
NSN: 5340-01-147-3243
NIINs: 011473243, 011473244
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
width245.0 MILLIMETERS NOMINAL MM
length292.0 MILLIMETERS NOMINAL MM
materialALUMINUM ALLOY 6061
thickness2.30 MILLIMETERS NOMINAL MM
special_featuresALUM ALLOY 6061-T6 PER QQ-A-250/11
material_document_and_classificationQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-147-3243
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13030286 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 292.0 MILLIMETERS NOMINAL MM
•
WIDTH: 245.0 MILLIMETERS NOMINAL MM
•
THICKNESS: 2.30 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
LENGTH292.0 MILLIMETERS NOMINAL MM
SPECIAL FEATURESALUM ALLOY 6061-T6 PER QQ-A-250/11
WIDTH245.0 MILLIMETERS NOMINAL MM
THICKNESS2.30 MILLIMETERS NOMINAL MM
SUBSTITUTES & CROSS-REFERENCES 1
10386454Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 13030286?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13030286?
13030286 is a PLATE,MOUNTING.
What parts can replace 13030286?
There is 1 known substitute for 13030286: 10386454. Substitute compatibility should be verified for your specific system.
What is the NSN for 13030286?
13030286 is cataloged in the U.S. Government catalog under NSN 5340-01-147-3243. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13030286