PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13029044
13029044 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, outside_diameter: 0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN, retainer_thickness: 0.038 INCHES NOMINAL IN, packing_inside_diameter: 0.170 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-177-9779, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13029044
NSN: 5330-01-177-9779
FSC: 5330
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
outside_diameter0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
retainer_thickness0.038 INCHES NOMINAL IN
packing_inside_diameter0.170 INCHES NOMINAL IN
NSN5330-01-177-9779
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13029044 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER THICKNESS: 0.038 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
PACKING INSIDE DIAMETER: 0.170 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER THICKNESS0.038 INCHES NOMINAL IN
OUTSIDE DIAMETER0.345 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
PACKING INSIDE DIAMETER0.170 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
S138Interchangeable
interchangeable cross-reference
interchangeable
538Interchangeable
interchangeable cross-reference
interchangeable
A38Interchangeable
interchangeable cross-reference
interchangeable
A-A-1399Interchangeable
interchangeable cross-reference
interchangeable
E18-2Interchangeable
interchangeable cross-reference
interchangeable
B18-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13029044?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13029044?
13029044 is a PACKING WITH RETAINER.
What parts can replace 13029044?
There are 10 known substitutes for 13029044: S138, 538, A38 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13029044?
13029044 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-177-9779. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13029044

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026