PartsTable
Technical Data Sheet
Download PDF

13027681 — BUMPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

13027681: BUMPER.

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER, hole_diameter: 0.187 INCHES NOMINAL IN, overall_height: 0.562 INCHES NOMINAL IN, style_designator: FLAT TOP COUNTERBORED, end_item_identification: 7010016002094, first_counterbore_depth: 0.3125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-619-5815, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13027681
NSN: 5340-01-619-5815
FSC: 5340 — Hardware, Commercial
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialRUBBER
hole_diameter0.187 INCHES NOMINAL IN
overall_height0.562 INCHES NOMINAL IN
style_designatorFLAT TOP COUNTERBORED
end_item_identification7010016002094
first_counterbore_depth0.3125 INCHES NOMINAL IN
material_hardness_rating50.0 SHORE DUROMETER A NOMINAL
first_counterbore_diameter0.375 INCHES NOMINAL IN
outside/top_flange_diameter0.75 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyBUMPER WITH UNTHREADED THROUGH HOLES
NSN5340-01-619-5815
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13027681 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE/TOP FLANGE DIAMETER: 0.75 INCHES NOMINAL IN
•
MATERIAL HARDNESS RATING: 50.0 SHORE DUROMETER A NOMINAL
•
FIRST COUNTERBORE DIAMETER: 0.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLAT TOP COUNTERBORED
•
FIRST COUNTERBORE DEPTH: 0.3125 INCHES NOMINAL IN
•
COLOR: BLACK
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.562 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER0.75 INCHES NOMINAL IN
MATERIAL HARDNESS RATING50.0 SHORE DUROMETER A NOMINAL
FIRST COUNTERBORE DIAMETER0.375 INCHES NOMINAL IN
STYLE DESIGNATORFLAT TOP COUNTERBORED
FIRST COUNTERBORE DEPTH0.3125 INCHES NOMINAL IN
COLORBLACK
PART NAME ASSIGNED BY CONTROLLING AGENCYBUMPER WITH UNTHREADED THROUGH HOLES
END ITEM IDENTIFICATION7010016002094
MATERIALRUBBER
SUBSTITUTES & CROSS-REFERENCES 2
13079188Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
8884T21Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 13027681?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13027681?
13027681 is a BUMPER.
What parts can replace 13027681?
There are 2 known substitutes for 13027681: 13079188, 8884T21. Substitute compatibility should be verified for your specific system.
What is the NSN for 13027681?
13027681 is cataloged in the U.S. Government catalog under NSN 5340-01-619-5815. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13027681