PartsTable
Technical Data Sheet
Download PDF

13025095 — ADAPTER SLEEVE,BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

13025095: ADAPTER SLEEVE,BEARING.

The ADAPTER SLEEVE,BEARING is a the manufacturer industrial component. Key specifications include taper: 1.5 PER METER IN MILLIMETERS NOMINAL, material: STEEL COMP 321 OVERALL, thread_class: 2A A, bore_diameter: 23.8 MILLIMETERS NOMINAL MM, overall_length: 41.0 MILLIMETERS NOMINAL MM, style_designator: W/NUT AND WASHER. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-107-1004, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13025095
NSN: 3110-01-107-1004
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
taper1.5 PER METER IN MILLIMETERS NOMINAL
materialSTEEL COMP 321 OVERALL
thread_class2A A
bore_diameter23.8 MILLIMETERS NOMINAL MM
overall_length41.0 MILLIMETERS NOMINAL MM
style_designatorW/NUT AND WASHER
thread_directionRIGHT-HAND
nominal_thread_size1.375 INCHES IN
overall_outside_diameter38.5 MILLIMETERS NOMINAL MM
thread_quantity_per_inch18
thread_series_designatorUNEF
material_document_and_classificationQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN3110-01-107-1004
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 13025095 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TAPER: 1.5 PER METER IN MILLIMETERS NOMINAL
•
STYLE DESIGNATOR: W/NUT AND WASHER
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OVERALL OUTSIDE DIAMETER: 38.5 MILLIMETERS NOMINAL MM
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.375 INCHES IN
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS
TAPER1.5 PER METER IN MILLIMETERS NOMINAL
STYLE DESIGNATORW/NUT AND WASHER
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH41.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER38.5 MILLIMETERS NOMINAL MM
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.375 INCHES IN
THREAD CLASS2A A
THREAD QUANTITY PER INCH18
BORE DIAMETER23.8 MILLIMETERS NOMINAL MM
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
10085897Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy 13025095?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13025095?
13025095 is a ADAPTER SLEEVE,BEARING.
What parts can replace 13025095?
There is 1 known substitute for 13025095: 10085897. Substitute compatibility should be verified for your specific system.
What is the NSN for 13025095?
13025095 is cataloged in the U.S. Government catalog under NSN 3110-01-107-1004. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13025095

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.