PartsTable / MRO / 130250
130250 — Technical Data Sheet
✓ Verified by PartsTable
Corolle · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SWITCH,PUSH is a Corolle industrial component. Key specifications include material: PLASTIC CASE, dial_size: 4-1/2 IN. DIA IN, bezel_type: SNAP-ON, case_style: SQUARE, scale_name: PRESSURE, scale_type: MULTIPLE.
This part is cataloged in the Federal Logistics Information System under NSN 5330-00-285-8387, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO →
MRO_GENERAL →
130250
NSN: 5330-00-285-8387 FSC: 5330 CAGE: 04285 — ATHEY PRODUCTS CORP (USA)
SPECIFICATIONS
material PLASTIC CASE dial_size 4-1/2 IN. DIA IN bezel_type SNAP-ON case_style SQUARE scale_name PRESSURE scale_type MULTIPLE seal_width 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN scale_range +0.0 TO 600.0 POUNDS PRESSURE PER SQUARE INCH LBS pointer_type INDICATING adjustability ADJUSTABLE overall_depth 2.190 INCHES NOMINAL IN overall_width 0.571 INCHES NOMINAL IN NSN 5330-00-285-8387
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 130250
MFR: Corolle
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEAL WIDTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• SEALING ELEMENT STYLE: ANGULAR
• ACCOMMODATED SHAFT DIAMETER: 2.000 INCHES NOMINAL IN
• MATERIAL: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
• HOUSING BORE DIAMETER: 2.996 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SEAL WIDTH 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN CASE STYLE SQUARE ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT SEALING ELEMENT STYLE ANGULAR ACCOMMODATED SHAFT DIAMETER 2.000 INCHES NOMINAL IN MATERIAL LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT HOUSING BORE DIAMETER 2.996 INCHES NOMINAL IN MATERIAL STEEL CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
559-552A Interchangeable GOVERNMENT REGISTRY interchangeable cross-reference
interchangeable
223288 Interchangeable GOVERNMENT REGISTRY interchangeable cross-reference
interchangeable
19269H Interchangeable GOVERNMENT REGISTRY interchangeable cross-reference
interchangeable
40734 Interchangeable GOVERNMENT REGISTRY interchangeable cross-reference
interchangeable
40408 Interchangeable GOVERNMENT REGISTRY interchangeable cross-reference
interchangeable
RT8100-126 Interchangeable GOVERNMENT REGISTRY interchangeable cross-reference
interchangeable
LIFECYCLE
Status MATURE
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 130250?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 130250?
130250 is a SWITCH,PUSH manufactured by Corolle. It is classified as a MRO (MRO_GENERAL).
What parts can replace 130250?
There are 27 known substitutes for 130250: 559-552A, 223288, 19269H and 24 more. Substitute compatibility should be verified for your specific system.
Is 130250 still available?
130250 is currently MATURE.