PartsTable
Technical Data Sheet
Download PDF

13024882 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

13024882: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: IRREGULAR, width: 2.850 INCHES MINIMUM AND 2.850 INCHES MINIMUM AND 2.910 INCHES MAXIMUM2.910 INCHES MAXIMUM IN, length: 12.220 INCHES MINIMUM AND 12.220 INCHES MINIMUM AND 12.280 INCHES MAXIMUM12.280 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086, thickness: 1.000 INCHES NOMINAL1.000 INCHES NOMINAL IN, mounting_hole_type: UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-620-6230, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13024882
NSN: 5340-01-620-6230
FSC: 5340 — Hardware, Commercial
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
shapeIRREGULAR
width2.850 INCHES MINIMUM AND 2.850 INCHES MINIMUM AND 2.910 INCHES MAXIMUM2.910 INCHES MAXIMUM IN
length12.220 INCHES MINIMUM AND 12.220 INCHES MINIMUM AND 12.280 INCHES MAXIMUM12.280 INCHES MAXIMUM IN
materialALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086
thickness1.000 INCHES NOMINAL1.000 INCHES NOMINAL IN
special_featuresPLATE IS AN ASSEMBLY THAT CONSISTS OF: (1) PLATE P/N: 13024882-1, (2) BLOCK P/N: 13024882-2, AND (1) ADAPTER PLATE P/N: 13024882-3.
mounting_hole_typeUNTHREADED
raised_surface_height0.778 INCHES MINIMUM AND 0.798 INCHES MAXIMUM IN
mounting_hole_diameter0.312 INCHES MINIMUM AND 0.317 INCHES MAXIMUM SIXTH HOLE IN
mounting_hole_quantity6
end_item_identificationA4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
part_name_assigned_by_controlling_agencyPLATE, ADAPTER
NSN5340-01-620-6230
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13024882 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 6
•
LENGTH: 12.220 INCHES MINIMUM AND 12.220 INCHES MINIMUM AND 12.280 INCHES MAXIMUM12.280 INCHES MAXIMUM IN
•
RAISED SURFACE HEIGHT: 0.778 INCHES MINIMUM AND 0.798 INCHES MAXIMUM IN
•
MOUNTING HOLE DIAMETER: 0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM FIRST HOLE IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY6
LENGTH12.220 INCHES MINIMUM AND 12.220 INCHES MINIMUM AND 12.280 INCHES MAXIMUM12.280 INCHES MAXIMUM IN
RAISED SURFACE HEIGHT0.778 INCHES MINIMUM AND 0.798 INCHES MAXIMUM IN
MOUNTING HOLE DIAMETER0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM FIRST HOLE IN
MOUNTING HOLE DIAMETER0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM FOURTH HOLE IN
MOUNTING HOLE DIAMETER0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM SECOND HOLE IN
MOUNTING HOLE DIAMETER0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM THIRD HOLE IN
MOUNTING HOLE DIAMETER0.312 INCHES MINIMUM AND 0.317 INCHES MAXIMUM FIFTH HOLE IN
MOUNTING HOLE DIAMETER0.312 INCHES MINIMUM AND 0.317 INCHES MAXIMUM SIXTH HOLE IN
SHAPEIRREGULAR
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 13024882?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13024882?
13024882 is a PLATE,MOUNTING.
What is the NSN for 13024882?
13024882 is cataloged in the U.S. Government catalog under NSN 5340-01-620-6230. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13024882

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.