PartsTable
Technical Data Sheet
Download PDF

13024881 — PLATE,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

13024881: PLATE,MOUNTING.

The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: IRREGULAR, width: 2.640 INCHES NOMINAL2.640 INCHES NOMINAL IN, length: 12.220 INCHES MINIMUM AND 12.220 INCHES MINIMUM AND 12.280 INCHES MAXIMUM12.280 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086, special_features: ONE OF THE RAISED SURFACES HAS A 0.385-0.405 BY 0.312-0.317 INCH MOUNTING SLOT. IN, mounting_hole_type: UNTHREADED.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-622-3110, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13024881
NSN: 5340-01-622-3110
FSC: 5340 — Hardware, Commercial
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
shapeIRREGULAR
width2.640 INCHES NOMINAL2.640 INCHES NOMINAL IN
length12.220 INCHES MINIMUM AND 12.220 INCHES MINIMUM AND 12.280 INCHES MAXIMUM12.280 INCHES MAXIMUM IN
materialALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086
special_featuresONE OF THE RAISED SURFACES HAS A 0.385-0.405 BY 0.312-0.317 INCH MOUNTING SLOT. IN
mounting_hole_typeUNTHREADED
raised_surface_width0.595 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
raised_surface_height0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
raised_surface_length1.292 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
mounting_hole_diameter0.312 INCHES MINIMUM AND 0.317 INCHES MAXIMUM FIFTH HOLE IN
mounting_hole_quantity5
end_item_identificationA4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
NSN5340-01-622-3110
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13024881 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 5
•
RAISED SURFACE WIDTH: 0.595 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
•
LENGTH: 12.220 INCHES MINIMUM AND 12.220 INCHES MINIMUM AND 12.280 INCHES MAXIMUM12.280 INCHES MAXIMUM IN
•
RAISED SURFACE HEIGHT: 0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
•
RAISED SURFACE LENGTH: 1.292 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B209 ASSN STD ALL MATERIAL RESPONSES OR ASTM B928 ASSN STD ALL MATERIAL RESPONSES
•
MOUNTING HOLE DIAMETER: 0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM FIRST HOLE IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY5
RAISED SURFACE WIDTH0.595 INCHES MINIMUM AND 0.655 INCHES MAXIMUM IN
LENGTH12.220 INCHES MINIMUM AND 12.220 INCHES MINIMUM AND 12.280 INCHES MAXIMUM12.280 INCHES MAXIMUM IN
RAISED SURFACE HEIGHT0.590 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
RAISED SURFACE LENGTH1.292 INCHES MINIMUM AND 1.312 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B209 ASSN STD ALL MATERIAL RESPONSES OR ASTM B928 ASSN STD ALL MATERIAL RESPONSES
MOUNTING HOLE DIAMETER0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM FIRST HOLE IN
MOUNTING HOLE DIAMETER0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM FOURTH HOLE IN
MOUNTING HOLE DIAMETER0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM SECOND HOLE IN
MOUNTING HOLE DIAMETER0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM THIRD HOLE IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 13024881?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13024881?
13024881 is a PLATE,MOUNTING.
What is the NSN for 13024881?
13024881 is cataloged in the U.S. Government catalog under NSN 5340-01-622-3110. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13024881

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.