PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1301847-73
1301847-73 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL, head_style: HEXAGON, head_height: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.750 INCHES MAXIMUM IN, fastener_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-702-4523, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1301847-73
NSN: 5305-00-702-4523
FSC: 5305
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
head_styleHEXAGON
head_height0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
thread_class2A A
thread_length0.750 INCHES MAXIMUM IN
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_between_flats0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
nominal_thread_diameter0.250 INCHES IN
minimum_tensile_strength50000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch20
NSN5305-00-702-4523
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1301847-73 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: CQBC
•
MINIMUM TENSILE STRENGTH: 50000 POUNDS PER SQUARE INCH LBS
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
THREAD QUANTITY PER INCH: 20
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONCQBC
MINIMUM TENSILE STRENGTH50000 POUNDS PER SQUARE INCH LBS
END ITEM IDENTIFICATIONMRAP- COUGAR AMBULANCE; MRAP BUFFALO MK2A2; MRAP - M-ATV WITH CS13 POP AND SNE; MRAP - COUGAR; MRAP - COUGAR CAT1 A2; MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE; ARMORED MULTI-PURPOSE VEHICLE (AMPV)
NOMINAL THREAD DIAMETER0.250 INCHES IN
THREAD QUANTITY PER INCH20
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
MS35307-6Interchangeable
interchangeable cross-reference
interchangeable
SHC250CX6Interchangeable
interchangeable cross-reference
interchangeable
419-387Interchangeable
interchangeable cross-reference
interchangeable
F10Interchangeable
interchangeable cross-reference
interchangeable
281478-13Interchangeable
interchangeable cross-reference
interchangeable
S7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1301847-73?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1301847-73?
1301847-73 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 1301847-73?
There are 31 known substitutes for 1301847-73: MS35307-6, SHC250CX6, 419-387 and 28 more. Substitute compatibility should be verified for your specific system.
Is 1301847-73 still available?
1301847-73 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1301847-73

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026