PartsTable
Technical Data Sheet
PartsTable / MRO / 1301808
1301808 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESISTOR,FIXED,FILM is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, nut_style: HEXAGON, nut_height: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN, body_length: 0.250 INCHES NOMINAL IN, thread_class: 3B, body_diameter: 0.090 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-551-7738, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1301808
NSN: 5310-00-551-7738
FSC: 5310
CAGE: 99470 — RANDALL CO INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
nut_styleHEXAGON
nut_height0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
body_length0.250 INCHES NOMINAL IN
thread_class3B
body_diameter0.090 INCHES NOMINAL IN
terminal_typeWIRE LEAD
thread_seriesUNF
inclosure_typeENCAPSULATED
terminal_length1.500 INCHES NOMINAL IN
style_designatorAXIAL TERMINAL EACH END
thread_directionRIGHT-HAND
NSN5310-00-551-7738
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1301808 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 18
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-268 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HOLE TYPE AND QUANTITY: 2 DRILLED
•
HOLE CONFIGURATION STYLE: CONFIGURATION B
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
WIDTH ACROSS FLATS: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
•
COUNTERBORE DIAMETER: 0.646 INCHES MINIMUM AND 0.666 INCHES MAXIMUM NUT IN
•
NOMINAL THREAD SIZE: 0.625 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD QUANTITY PER INCH18
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-268 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HOLE TYPE AND QUANTITY2 DRILLED
HOLE CONFIGURATION STYLECONFIGURATION B
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
WIDTH ACROSS FLATS0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN
COUNTERBORE DIAMETER0.646 INCHES MINIMUM AND 0.666 INCHES MAXIMUM NUT IN
NOMINAL THREAD SIZE0.625 INCHES IN
BEARING SURFACE FINISH125.0 MICROINCHES
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
116447-223Interchangeable
interchangeable cross-reference
interchangeable
S9546-223Interchangeable
interchangeable cross-reference
interchangeable
204-2202Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1301808?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1301808?
1301808 is a RESISTOR,FIXED,FILM. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1301808?
There are 3 known substitutes for 1301808: 116447-223, S9546-223, 204-2202. Substitute compatibility should be verified for your specific system.
What is the NSN for 1301808?
1301808 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-551-7738. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1301808

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026