PartsTable
Technical Data Sheet
Download PDF

13011A-0124 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

13011A-0124: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include corner_cut_type: SQUARE, mounting_hole_type: UNABLE TO DECODE, end_item_identification: 5840-01-355-0092;RADAR SET, mounting_hole/slot_quantity: 12, part_name_assigned_by_controlling_agency: TRANSPORT COVER ASSEMBLY. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-657-2133, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13011A-0124
NSN: 5340-01-657-2133
FSC: 5340 — Hardware, Commercial
CAGE: 01365 — MARINE CORPS SYSTEMS COMMAND DIV MARINE CORPS SYSTEMS COMMAND TECHNICAL DATA REPOSITORY CUSTOMER SERVICE (USA)
SPECIFICATIONS
corner_cut_typeSQUARE
mounting_hole_typeUNABLE TO DECODE
end_item_identification5840-01-355-0092;RADAR SET
mounting_hole/slot_quantity12
part_name_assigned_by_controlling_agencyTRANSPORT COVER ASSEMBLY
NSN5340-01-657-2133
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13011A-0124 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE/SLOT QUANTITY: 12
•
CORNER CUT TYPE: SQUARE
•
MOUNTING HOLE TYPE: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
MOUNTING HOLE/SLOT QUANTITY12
SPECIAL FEATURESINSTALL CAPTIVE SCREWS,FN 1 IN DUCT TRANSITION FN 2 AFTER FINAL FILM FROM PAINT;APPLY RUBBER GASKET (FN 3 & FN 4) AROUND ENTIRE PERIMETER OF FN 2,ENSURE GASKET HOLES LINE UP WITH COUNTERSUNK HOLES IN FN 2,ENSURE THAT ALL JOINTS ARE TIGHT;DURING ASSEMBLY REPLACE 53-11-510-26 CAPTIVE SCREW WITH ALTERNATIVE CAPTIVE SCREW P/N: 58-21-214-26;12 FASTENERS IN
PART NAME ASSIGNED BY CONTROLLING AGENCYTRANSPORT COVER ASSEMBLY
END ITEM IDENTIFICATION5840-01-355-0092;RADAR SET
CORNER CUT TYPESQUARE
MOUNTING HOLE TYPEUNABLE TO DECODE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 13011A-0124?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13011A-0124?
13011A-0124 is a COVER,ACCESS.
What is the NSN for 13011A-0124?
13011A-0124 is cataloged in the U.S. Government catalog under NSN 5340-01-657-2133. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13011A-0124