PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13000F11
13000F11 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The CARBURETOR,PRESSURE INJECTION is a the manufacturer industrial component. Key specifications include draft_direction: DOWN, subassembly_name: AIR METER UNIT AND FUEL METER UNIT AND MAIN BODY, fsc_application_data: FUEL SYSTEM,ENGINE AIRCRAFT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-058-2073, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13000F11
NSN: 5305-00-058-2073
FSC: 5305
CAGE: 99932 — MOOG INC. (USA)
SPECIFICATIONS
barrel_quantity2
draft_directionDOWN
subassembly_nameAIR METER UNIT AND FUEL METER UNIT AND MAIN BODY
fsc_application_dataFUEL SYSTEM,ENGINE AIRCRAFT
NSN5305-00-058-2073
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 13000F11 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM YIELD STRENGTH: 130000 POUNDS PER SQUARE INCH LBS
•
HEAD DIAMETER: 0.134 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD LENGTH: 0.168 INCHES MINIMUM IN
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM YIELD STRENGTH130000 POUNDS PER SQUARE INCH LBS
HEAD DIAMETER0.134 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
THREAD LENGTH0.168 INCHES MINIMUM IN
MATERIALSTEEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD DIAMETER0.086 INCHES IN
THREAD QUANTITY PER INCH56
INTERNAL DRIVE STYLEHEXAGON
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
30460Interchangeable
interchangeable cross-reference
interchangeable
4025-0937Interchangeable
interchangeable cross-reference
interchangeable
21352Interchangeable
interchangeable cross-reference
interchangeable
19834Interchangeable
interchangeable cross-reference
interchangeable
CPB11-13000F9Interchangeable
interchangeable cross-reference
interchangeable
58CPB11-13000C7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13000F11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13000F11?
13000F11 is a CARBURETOR,PRESSURE INJECTION.
What parts can replace 13000F11?
There are 12 known substitutes for 13000F11: 30460, 4025-0937, 21352 and 9 more. Substitute compatibility should be verified for your specific system.
Is 13000F11 still available?
13000F11 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13000F11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026