PartsTable
Technical Data Sheet
Download PDF

13000012-0121 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · PIPE SECTION
PRODUCT OVERVIEW

13000012-0121: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, exterior_color: NATURAL, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.688 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-00-067-8697, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13000012-0121
NSN: 4720-00-067-8697
FSC: 4720 — Hose and Flexible Tubing
CAGE: 78570 — SMITHS TUBULAR SYSTEMS-LACONIA, INC. (USA)
SPECIFICATIONS
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B FIRST END
exterior_colorNATURAL
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.688 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter1.031 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
features_providedELECTROSTATIC DISCHARGE CAPABILITY
operating_pressure1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure4000.0 POUNDS PER SQUARE INCH LBS
NSN4720-00-067-8697
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 13000012-0121 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 15.750 INCHES NOMINAL WORKING IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 6.500 INCHES IN
•
CONNECTION STYLE: SWIVEL NUT FLARE FIRST END
•
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 1ST LAYER MOLDED RUBBER, SYNTHETIC
•
CONNECTION TYPE: THREADED INTERNAL TUBE FIRST END
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
OUTSIDE DIAMETER: 1.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH15.750 INCHES NOMINAL WORKING IN
TEMP RATING-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS6.500 INCHES IN
CONNECTION STYLESWIVEL NUT FLARE FIRST END
LAYER COMPOSITION AND LOCATIONOUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 1ST LAYER MOLDED RUBBER, SYNTHETIC
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER1.031 INCHES NOMINAL IN
OPERATING PRESSURE1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
FEATURES PROVIDEDELECTROSTATIC DISCHARGE CAPABILITY
SUBSTITUTES & CROSS-REFERENCES 7
R3800CC12-0121Reference document
Same NSN cross-reference
Reference document — Secondary reference
R3800CC12-0121LReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MIL-DTL-25579Reference document
Same NSN cross-reference
Reference document — Identification reference
R50200CC12-0121Reference document
Same NSN cross-reference
Reference document — Secondary reference
77917-34X2PC2Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS8005K121ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 13000012-0121?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13000012-0121?
13000012-0121 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 13000012-0121?
There are 7 known substitutes for 13000012-0121: R3800CC12-0121, R3800CC12-0121L, MIL-DTL-25579 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13000012-0121?
13000012-0121 is cataloged in the U.S. Government catalog under NSN 4720-00-067-8697. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13000012-0121

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.