PartsTable
Technical Data Sheet
PartsTable / O-RING / 130-51
130-51 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: RESIN, duty_type: CONTINUOUS, hole_type: DRILLED, body_style: CYLINDRICAL FRAME, body_width: 2.375 INCHES NOMINAL IN, head_style: SPADE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-151-4125, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
130-51
NSN: 5331-00-151-4125
FSC: 5331 — O-RING
CAGE: 45402 — MEGGITT SAFETY SYSTEMS, INC. DBA MEGGITT CONTROL SYSTEMS-VENTURA COUNTY (USA)
SPECIFICATIONS
materialRESIN
duty_typeCONTINUOUS
hole_typeDRILLED
body_styleCYLINDRICAL FRAME
body_width2.375 INCHES NOMINAL IN
head_styleSPADE
body_height0.850 INCHES NOMINAL IN
body_length2.781 INCHES MAXIMUM IN
head_height0.156 INCHES NOMINAL IN
head_length0.250 INCHES NOMINAL IN
temp_rating-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
pattern_typeAMERICAN
NSN5331-00-151-4125
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 130-51 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.934 INCHES MINIMUM AND 0.964 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.934 INCHES MINIMUM AND 0.964 INCHES MAXIMUM IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
A-A-2312Interchangeable
interchangeable cross-reference
interchangeable
GGG-F-325 TY9STBInterchangeable
interchangeable cross-reference
interchangeable
GGG-F-325Interchangeable
interchangeable cross-reference
interchangeable
13051Interchangeable
interchangeable cross-reference
interchangeable
10811Interchangeable
interchangeable cross-reference
interchangeable
666092-690Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 130-51?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 130-51?
130-51 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 130-51?
There are 17 known substitutes for 130-51: A-A-2312, GGG-F-325 TY9STB, GGG-F-325 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 130-51?
130-51 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-151-4125. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 130-51

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026