PartsTable
Technical Data Sheet
PartsTable / MRO / 130-0164
130-0164 ✓ Verified by PartsTable
Rexel · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

Rexel plastic index dividers are manufactured in tear-resistant polypropylene film. The cut-away printed tabs make them ideal for project-related organisation and grouping of your documents. Extra wide index dividers allow for problem-free filing of document pockets.

The extra width means the tabs are visible at all times. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-054-8748, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 130-0164
NSN: 4720-00-054-8748
FSC: 4720
CAGE: 99193 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - PHOENIX (USA)
SPECIFICATIONS
end_item_identificationAN/MRC-113(V)2
general_characteristics_item_descriptionMODULE IS USED FOR TRANSMITTER
NSN4720-00-054-8748
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 130-0164 · Rexel ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM INSIDE BENDING RADIUS: 2.000 INCHES IN
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
THREAD CLASS: 3B FIRST END
•
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
•
VACUUM IN TORR: 50.8
•
NOMINAL THREAD SIZE: 0.438 INCHES FIRST END IN
•
OPERATING PRESSURE: 100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
•
INSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM INSIDE BENDING RADIUS2.000 INCHES IN
CROSS-SECTIONAL SHAPE STYLEROUND
THREAD CLASS3B FIRST END
LAYER COMPOSITION AND LOCATIONOUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
VACUUM IN TORR50.8
NOMINAL THREAD SIZE0.438 INCHES FIRST END IN
OPERATING PRESSURE100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
INSIDE SURFACE CONDITIONSMOOTH
CONNECTION TYPETHREADED INTERNAL TUBE FIRST END
SEAT ANGLE37.0 DEGREES FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
95950Interchangeable
interchangeable cross-reference
interchangeable
1300164Interchangeable
interchangeable cross-reference
interchangeable
1378-8Interchangeable
interchangeable cross-reference
interchangeable
1219-117-8Interchangeable
interchangeable cross-reference
interchangeable
R1183-8Interchangeable
interchangeable cross-reference
interchangeable
1-300-164-01Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 130-0164?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 130-0164?
130-0164 is a MODULE,RADIO FREQUENCY manufactured by Rexel. It is classified as a MRO (MRO_GENERAL).
What parts can replace 130-0164?
There are 8 known substitutes for 130-0164: 95950, 1300164, 1378-8 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 130-0164?
130-0164 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-054-8748. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 130-0164

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026