PartsTable
Technical Data Sheet
Download PDF

13-868 — FUSE,CARTRIDGE

✓ Government record, cited
schleich · MRO · MRO_GENERAL
PRODUCT OVERVIEW

13-868: FUSE,CARTRIDGE.

Most Hereford calves have a dark red coat Most Hereford calves have a dark red coat. Their face, chest, neck and belly are white. The calves process the food they eat extremely efficiently, which allows them to put on several hundred kilograms in their first two years.

A fully grown cow weighs 600 to 800 kg, while a fully grown bull weighs 900 to 1,350 kg. Fun fact A Hereford calf weighs around 40 kg at birth. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-071-1783, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 13-868
NSN: 5305-00-071-1783
NIINs: 000711783, 002286978, 013220545, 014265562
FSC: 5305 — Screws
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
thread_class2A A
thread_length1.250 INCHES MINIMUM AND 1.442 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES THREADS
fastener_length4.156 INCHES MINIMUM AND 4.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentZINC AND CHROMATE OVERALL
width_between_flats0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
end_item_identificationMRAP RG-33; A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
nominal_thread_diameter0.500 INCHES IN
NSN5305-00-071-1783
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 13-868 · schleich ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES THREADS
•
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
•
FASTENER LENGTH: 4.156 INCHES MINIMUM AND 4.250 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 1.250 INCHES MINIMUM AND 1.442 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAEJ429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR ASTMA354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES THREADS
HEAD HEIGHT0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
FASTENER LENGTH4.156 INCHES MINIMUM AND 4.250 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH1.250 INCHES MINIMUM AND 1.442 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAEJ429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR ASTMA354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.500 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 4
G1921BH050C425NSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ASME B18.2.1Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS90728-124Reference document
Same NSN cross-reference
Reference document — Secondary reference
B1821BH050C425NReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 13-868?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13-868?
13-868 is a FUSE,CARTRIDGE manufactured by schleich. It is classified as a MRO (MRO_GENERAL).
What parts can replace 13-868?
There are 4 known substitutes for 13-868: G1921BH050C425N, ASME B18.2.1, MS90728-124 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13-868?
13-868 is cataloged in the U.S. Government catalog under NSN 5305-00-071-1783. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13-868