PartsTable
Technical Data Sheet
PartsTable / MRO / 13-800
13-800 ✓ Verified by PartsTable
Clementoni · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CONNECTOR,RECEPTACLE,ELECTRICAL is a Clementoni industrial component. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: STEEL OVERALL, body_style: STRAIGHT SHAPE, EXTERNAL COUPLING, head_style: HEXAGON, shell_type: SOLID, head_height: 0.150 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-146-2635, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 13-800
NSN: 5315-00-146-2635
FSC: 5315
CAGE: 0W357 — PDI GROUND SUPPORT SYSTEMS, INC. (USA)
SPECIFICATIONS
length10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
materialSTEEL OVERALL
body_styleSTRAIGHT SHAPE, EXTERNAL COUPLING
head_styleHEXAGON
shell_typeSOLID
head_height0.150 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
thread_class2A A
overall_width1.980 INCHES NOMINAL IN
terminal_typeSOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
thread_length1.21 INCHES MINIMUM AND 1.25 INCHES MAXIMUM IN
heat_treatmentT-6511 SOLUTION HEAT TREATED
overall_height1.082 INCHES NOMINAL IN
NSN5315-00-146-2635
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 13-800 · Clementoni ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST HOLE DIAMETER: 0.250 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 3.875 INCHES NOMINAL IN
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 1.688 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
MATERIAL: STEEL COMP 303 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.7480 INCHES MINIMUM AND 0.7520 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST HOLE DIAMETER0.250 INCHES NOMINAL IN
PIN OVERALL LENGTH3.875 INCHES NOMINAL IN
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN1.688 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL COMP 303 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.7480 INCHES MINIMUM AND 0.7520 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
J221P115Interchangeable
interchangeable cross-reference
interchangeable
SS845-1889836PIInterchangeable
interchangeable cross-reference
interchangeable
556-6408589-32Interchangeable
interchangeable cross-reference
interchangeable
G350195S1Interchangeable
interchangeable cross-reference
interchangeable
13800Interchangeable
interchangeable cross-reference
interchangeable
24472Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13-800?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13-800?
13-800 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Clementoni. It is classified as a MRO (MRO_GENERAL).
What parts can replace 13-800?
There are 18 known substitutes for 13-800: J221P115, SS845-1889836PI, 556-6408589-32 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13-800?
13-800 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-146-2635. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13-800

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026