PartsTable
Technical Data Sheet
Download PDF

13-560-14 — FILTER,LOW PASS

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

13-560-14: FILTER,LOW PASS.

The FILTER,LOW PASS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT CHAMFER, head_height: 0.187 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.307 INCHES NOMINAL IN, thread_length: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-016-4960, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 13-560-14
NSN: 5305-01-016-4960
NIINs: 010164960, 010521741
FSC: 5305 — Screws
CAGE: 37695 — RAYTHEON COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT CHAMFER
head_height0.187 INCHES NOMINAL IN
thread_class3A A
head_diameter0.307 INCHES NOMINAL IN
thread_length1.000 INCHES NOMINAL IN
fastener_length5.290 INCHES NOMINAL IN
hardness_rating35.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentOXIDE OVERALL
width_across_flats0.157 INCHES NOMINAL IN
internal_drive_styleHEXAGON
NSN5305-01-016-4960
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 13-560-14 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.157 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.187 INCHES NOMINAL IN
•
FASTENER LENGTH: 5.290 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 1.000 INCHES NOMINAL IN
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.157 INCHES NOMINAL IN
HEAD HEIGHT0.187 INCHES NOMINAL IN
FASTENER LENGTH5.290 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH1.000 INCHES NOMINAL IN
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTOXIDE OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 13-560-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13-560-14?
13-560-14 is a FILTER,LOW PASS. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 13-560-14?
13-560-14 is cataloged in the U.S. Government catalog under NSN 5305-01-016-4960. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13-560-14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.