13-170-001 — BEARING,BALL,ANNULAR

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

13-170-001: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, bore_diameter: 0.1875 INCHES NOMINAL IN, contact_angle: 16.5 DEGREES NOMINAL, overall_width: 0.1562 INCHES NOMINAL IN, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-725-2511, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

13-170-001

NSN: 3110-00-725-2511
NIINs: 007252511, 007557361, 014118364
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 40920 — MPB CORP DIV TIMKEN SUPER PRECISION (USA)

SPECIFICATIONS

material	STEEL BALL
bore_shape	STRAIGHT
bore_diameter	0.1875 INCHES NOMINAL IN
contact_angle	16.5 DEGREES NOMINAL
overall_width	0.1562 INCHES NOMINAL IN
load_direction	ANGULAR
surface_finish	GROUND
shield_quantity	2
special_features	INTERNAL CLEARANCE MEASURED UNDER A 1/2 LB REVERSING LOAD; SPRING SEPERATORS,SHIELDS AND WIRES OF 302 STAINLESS STEEL; OTHER SPECIAL FEATURES LBS
style_designator	NON-LOADING GROOVE, NON-SEPARABLE
component_quantity	12
internal_clearance	0.0000 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL IN
NSN	3110-00-725-2511

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: COILED

•

LUBRICATION MATERIAL: OIL

•

INTERNAL CLEARANCE: 0.0000 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL IN

•

INTERNAL FIT-UP DESIGNATION: TIGHT

•

SURFACE FINISH: GROUND

•

SHIELD QUANTITY: 2

•

STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	COILED
LUBRICATION MATERIAL	OIL
INTERNAL CLEARANCE	0.0000 INCHES MINIMUM RADIAL AND 0.0003 INCHES MAXIMUM RADIAL IN
INTERNAL FIT-UP DESIGNATION	TIGHT
SURFACE FINISH	GROUND
SHIELD QUANTITY	2
STYLE DESIGNATOR	NON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH	0.1562 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER	0.5000 INCHES NOMINAL IN
BORE SHAPE	STRAIGHT

SUBSTITUTES & CROSS-REFERENCES 7

150650-02Reference document

Same NSN cross-reference

Reference document — Secondary reference

B793-90Reference document

Same NSN cross-reference

Reference document — Secondary reference

BCSR186SSWX12K5VLReference document

Same NSN cross-reference

Reference document — Secondary reference

R3SSZAX306-0-11Reference document

Same NSN cross-reference

Reference document — Secondary reference

3110PL0138871Reference document

Same NSN cross-reference

Reference document — Informative reference only

150652-01Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 13-170-001?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 13-170-001?

13-170-001 is a BEARING,BALL,ANNULAR.

What parts can replace 13-170-001?

There are 7 known substitutes for 13-170-001: 150650-02, B793-90, BCSR186SSWX12K5VL and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 13-170-001?

13-170-001 is cataloged in the U.S. Government catalog under NSN 3110-00-725-2511. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

13-170-001 — BEARING,BALL,ANNULAR

Request a Quote — 13-170-001