PartsTable
Technical Data Sheet
PartsTable / MRO / 13-1039
13-1039 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, body_style: BUSHING MOUNTED, cone_width: 1.1930 INCHES NOMINAL IN, body_length: 1.000 INCHES NOMINAL IN, body_diameter: 0.688 INCHES NOMINAL IN, bore_diameter: 1.8750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3117, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 13-1039
NSN: 3110-00-100-3117
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleBUSHING MOUNTED
cone_width1.1930 INCHES NOMINAL IN
body_length1.000 INCHES NOMINAL IN
body_diameter0.688 INCHES NOMINAL IN
bore_diameter1.8750 INCHES NOMINAL IN
bushing_length0.469 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
mounting_methodTHREADED BUSHING
style_designatorNORMAL ANGLE
cone_corner_radius0.2500 INCHES NOMINAL IN
nominal_thread_size0.562 INCHES IN
NSN3110-00-100-3117
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 13-1039 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.8750 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.2500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE WIDTH: 1.1930 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.8750 INCHES NOMINAL IN
CONE CORNER RADIUS0.2500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
CONE WIDTH1.1930 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
FFS111Interchangeable
interchangeable cross-reference
interchangeable
MS35492-293Interchangeable
interchangeable cross-reference
interchangeable
149400Interchangeable
interchangeable cross-reference
interchangeable
73586Interchangeable
interchangeable cross-reference
interchangeable
P149-400Interchangeable
interchangeable cross-reference
interchangeable
39-909Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13-1039?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13-1039?
13-1039 is a CONE AND ROLLERS,TAPERED ROLLER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 13-1039?
There are 22 known substitutes for 13-1039: FFS111, MS35492-293, 149400 and 19 more. Substitute compatibility should be verified for your specific system.
Is 13-1039 still available?
13-1039 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13-1039

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026