PartsTable
Technical Data Sheet
Download PDF

13-0819-01 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

13-0819-01: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 1.250 INCHES NOMINAL IN, center_hole_diameter: 0.875 INCHES NOMINAL IN, cross-sectional_height: 0.188 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-440-7550, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13-0819-01
NSN: 5330-01-440-7550
FSC: 5330 — Packing and Gasket Materials
CAGE: 49524 — SCOTSMAN INDUSTRIES INC DIV SCOTSMAN ICE SYSTEMS (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
hardness_rating80.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter1.250 INCHES NOMINAL IN
center_hole_diameter0.875 INCHES NOMINAL IN
cross-sectional_height0.188 INCHES NOMINAL IN
cross-sectional_shape_styleU
NSN5330-01-440-7550
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 13-0819-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.188 INCHES NOMINAL IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: U
•
PERIPHERAL DIAMETER: 1.250 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.875 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.188 INCHES NOMINAL IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL OVERALL
CROSS-SECTIONAL SHAPE STYLEU
PERIPHERAL DIAMETER1.250 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.875 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
AN6226-50Reference document
Same NSN cross-reference
Reference document — Secondary reference
6226-50Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 13-0819-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13-0819-01?
13-0819-01 is a PACKING,PREFORMED.
What parts can replace 13-0819-01?
There are 2 known substitutes for 13-0819-01: AN6226-50, 6226-50. Substitute compatibility should be verified for your specific system.
What is the NSN for 13-0819-01?
13-0819-01 is cataloged in the U.S. Government catalog under NSN 5330-01-440-7550. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13-0819-01