PartsTable
Technical Data Sheet
Download PDF

13-08-0515 — FLANGE,PIPE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

13-08-0515: FLANGE,PIPE.

The FLANGE,PIPE is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY, thickness: 1.625 INCHES NOMINAL IN, neck_height: 2.750 INCHES NOMINAL IN, groove_depth: 0.108 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN, groove_width: 0.125 INCHES NOMINAL IN, flange_diameter: 13.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-123-1579, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13-08-0515
NSN: 4730-01-123-1579
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialNICKEL ALLOY
thickness1.625 INCHES NOMINAL IN
neck_height2.750 INCHES NOMINAL IN
groove_depth0.108 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
groove_width0.125 INCHES NOMINAL IN
flange_diameter13.125 INCHES NOMINAL IN
style_designatorROUND, ONE BOLT HOLE CIRCLE
bolt_hole_diameter0.688 INCHES NOMINAL IN
bolt_hole_quantity16
bolt_circle_diameter11.375 INCHES NOMINAL IN
flange_section_stylePLAIN FACE, WELDING NECK
groove_pitch_diameter8.875 INCHES NOMINAL IN
NSN4730-01-123-1579
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 13-08-0515 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 13.125 INCHES NOMINAL IN
•
FACE SEATING SURFACE CONDITION: MACHINED
•
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED: 150.0 FAHRENHEIT WATER, SALT DEGF
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 8.000 INCHES NOMINAL IN
•
OPERATING PRESSURE AND TYPE: 700.0 POUNDS PER SQUARE INCH (PSI) SALT WATER MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
•
FLANGE SECTION STYLE: PLAIN FACE, WELDING NECK
•
STYLE DESIGNATOR: ROUND, ONE BOLT HOLE CIRCLE
•
BOLT HOLE DIAMETER: 0.688 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER13.125 INCHES NOMINAL IN
FACE SEATING SURFACE CONDITIONMACHINED
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED150.0 FAHRENHEIT WATER, SALT DEGF
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED8.000 INCHES NOMINAL IN
OPERATING PRESSURE AND TYPE700.0 POUNDS PER SQUARE INCH (PSI) SALT WATER MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
FLANGE SECTION STYLEPLAIN FACE, WELDING NECK
STYLE DESIGNATORROUND, ONE BOLT HOLE CIRCLE
BOLT HOLE DIAMETER0.688 INCHES NOMINAL IN
NECK HEIGHT2.750 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-C-15726 MIL SPEC SINGLE MATERIAL RESPONSE
SUBSTITUTES & CROSS-REFERENCES 1
810-1385861Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 13-08-0515?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13-08-0515?
13-08-0515 is a FLANGE,PIPE.
What parts can replace 13-08-0515?
There is 1 known substitute for 13-08-0515: 810-1385861. Substitute compatibility should be verified for your specific system.
What is the NSN for 13-08-0515?
13-08-0515 is cataloged in the U.S. Government catalog under NSN 4730-01-123-1579. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13-08-0515

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.