PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 13-0184
13-0184 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The LOOP,WIRE,OTOLOGICAL is a the manufacturer industrial component. Key specifications include height: 0.156 INCHES NOMINAL IN, length: 4.0 MILLIMETERS NOMINAL MM, diameter: 0.005 INCHES IN, material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT FILLISTER, construction: ONE-PIECE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-336-1215, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
13-0184
NSN: 5315-00-336-1215
FSC: 5315
CAGE: 93343 — WHITE FARM EQUIPMENT CO SUB OF TIC INVESTMENT CORP
SPECIFICATIONS
height0.156 INCHES NOMINAL IN
length4.0 MILLIMETERS NOMINAL MM
diameter0.005 INCHES IN
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT FILLISTER
constructionONE-PIECE
overall_width0.205 INCHES MAXIMUM IN
overall_height0.165 INCHES MAXIMUM IN
overall_length0.210 INCHES MAXIMUM IN
hardness_rating87.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 91.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
mounting_methodTERMINAL
terminal_length0.500 INCHES MINIMUM IN
NSN5315-00-336-1215
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 13-0184 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDER HEAD LENGTH: 1.312 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
PIN HEAD DIAMETER: 0.406 INCHES NOMINAL IN
•
HEAD STYLE: FLAT FILLISTER
•
FEATURES PROVIDED: CASEHARDENED
•
HARDNESS RATING: 87.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 91.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
•
DIAMETER: 0.246 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
UNDER HEAD LENGTH1.312 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
PIN HEAD DIAMETER0.406 INCHES NOMINAL IN
SPECIAL FEATURESBEARING SURFACE OF HEAD SQUARE 0.246 IN. MIN 0.250 IN. MAX ACROSS FLATS 0.109 IN. LG IN
HEAD STYLEFLAT FILLISTER
FEATURES PROVIDEDCASEHARDENED
HARDNESS RATING87.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND 91.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL
DIAMETER0.246 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
HEIGHT0.156 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
37B4768-5Interchangeable
interchangeable cross-reference
interchangeable
22-0625-5Interchangeable
interchangeable cross-reference
interchangeable
22-10-10Interchangeable
interchangeable cross-reference
interchangeable
208274Interchangeable
interchangeable cross-reference
interchangeable
07-208274Interchangeable
interchangeable cross-reference
interchangeable
M22-1010Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 13-0184?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 13-0184?
13-0184 is a LOOP,WIRE,OTOLOGICAL.
What parts can replace 13-0184?
There are 18 known substitutes for 13-0184: 37B4768-5, 22-0625-5, 22-10-10 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 13-0184?
13-0184 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-336-1215. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 13-0184

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026