PartsTable
Technical Data Sheet
Download PDF

12Z7116-7026 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

12Z7116-7026: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include temp_rating: -67.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF, hole_diameter: 0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.250 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN, overall_length: 2.250 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN, cross-sectional_thickness: 0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-434-3579, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
12Z7116-7026
NSN: 5330-00-434-3579
FSC: 5330 — Packing and Gasket Materials
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
temp_rating-67.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
hole_diameter0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.250 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN
overall_length2.250 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN
cross-sectional_thickness0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-R-3065,GR SB612-ABE-FF MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.253 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
outside_edge_to_bolt_hole_center_distance_along_length0.253 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
center_to_center_distance_between_bolt_holes_along_width1.750 INCHES MINIMUM AND 1.766 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length1.750 INCHES MINIMUM AND 1.766 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-434-3579
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 12Z7116-7026 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -67.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL THICKNESS: 0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-3065,GR SB612-ABE-FF MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.750 INCHES MINIMUM AND 1.766 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.750 INCHES MINIMUM AND 1.766 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
TEMP RATING-67.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
CROSS-SECTIONAL THICKNESS0.021 INCHES MINIMUM AND 0.041 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-3065,GR SB612-ABE-FF MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH2.250 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.250 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.750 INCHES MINIMUM AND 1.766 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.750 INCHES MINIMUM AND 1.766 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.253 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
HOLE DIAMETER0.209 INCHES MINIMUM AND 0.229 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 12Z7116-7026?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 12Z7116-7026?
12Z7116-7026 is a GASKET.
What is the NSN for 12Z7116-7026?
12Z7116-7026 is cataloged in the U.S. Government catalog under NSN 5330-00-434-3579. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 12Z7116-7026

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.